EG STARTS 5 Piece 24mm Full Color LED Illuminated Push Button Built-in Switch 5V Buttons for Arcade Joystick Games Mame Jamma Raspberry Pi 2

The media could not be loaded.  I use these for arcade cabinet mine did not come with the wiring but I had some already. I definitely would buy from this seller again.

Bought it for a small home project. Using it with this board:https://smile.amazon.com/gp/product/B07YYZZV3T/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1PS: I'm not sure if the board lights up the buttons. Since it's something I don't need, I didn't look too hard at it. If lighting up these buttons is something you need, make sure to research it before you buy it.The package includes only the buttons and the plastic socket to hold them in place. No cables or anything. Quick and uneventful delivery.I'm using the board referenced above with a Raspberry Pi and the pygame library. Button detection worked out of the box, with only a few lines of python code. Very simple to setup and use.

Just received this set of buttons. Everything works.Minor notes:The LEDs do come with resistors installed I see, so they are safe to be used with 5V power supply with no resistor.I so far measured that red led takes about 6 mA of current while blue led takes about 10 mA.Inside they are even wired differently. The red led is actually two leds wired serially with 201ohm resistor while blue led wirestwo blue leds in parallel with same 201ohm resistror. Didn't check other leds yet.Switch is very nice, comes in contact after light push on the butto according to my multi-meter.Will soon connect to my arduino.One big problem with the buttons for me (but this is my fault only) is that the buttons are quite tall, so it would be challenging to find an nice enclosure for them.

They seem adequate to me. I put all 5 on an oscilloscope and see no evidence of bounce problems.

They are HUGE. Not a fan of that but they wired up great and work like a champ with a RaspberryPi ZeroW.

No labeling how pins workEach light takes a different current draw (like wildly different)Yellow and Red are not as bright as other under same load from my power supply

yellow switch light is very weak in comparison to the others even with proper voltage. Not happy

Worked great for the project we needed them for. Perfect size and color.

Work great!!!