Description
- This brand new HTP Flowmeter which is perfect for Mig and Tig Welding.
- The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our listing for those.
- A very nice thing about this Flowmeter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.
- Watch out for knock-off flowmeters that do not use the standard N-24 nut and NP-72 outlet nipples. These flowmeters use nylon washers to seal, where our fittings seal on the fitting and do not require any nylon washers!
- Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. You can see from the diagram, we do stock replacement parts for this flowmeter. Remember, not all flowmeters are created equal- they may look the same on the outside, but the others do not have HTP Quality on the inside.
Specifications Preset: 30 P.S.I. Flowmeter Range 10-60 SCFH inlet connection: CGA580 connection: female UNF9/16 with 1/4" barbed fitting Package Includes 1 x Pressure reducer 1 x 1/4" barbed fitting
