NADAMOO Tub and Tile Refinishing Kit (3kg / 105 oz, with tools, White), DIY Bathtub Sink Countertop Paint Resurface Kit for Bathroom Kitchen Porcelain Fiberglass, Semi-gloss

The step process is easy and now my sink is brand new again!

Before using this I had tried the rustoleum product. The Rustoleum did not cover well and caused me to smell colors and hear the future. No kidding that crap caused all of us to have to leave the house and it was still unpleasant hours later when we came back, it was still bad for most of the night, and that was with the house ventilation fan going. Plus, it looked terrible. I sanded, cleaned with alcohol, and ordered this. It has almost zero odor. Even less than a standard latex paint. I painted a five foot fiberglass tub and shower. I split the product and mixed up half for the first coat. It goes on very smooth and the semi gloss looks like the factory coating. Covered old rust stains and discoloration well on the first coat. Did a second coat after three hours. This coat made it absolutely a uniform white color with no sign of it being a paint job. Couple tips. Remove all the metal hardware, or tape up. It will not come off easily if you make a mess. Watch for drips because if you leave them sit a few minutes they will be hard to brush or roll out. I didn’t notice a couple in the bottom of the tub and ends up peeling them up before moving on to that part of the paint job. The texture of the bottom makes it hard to notice but after using a small brush to hit drips when they happened the finished coat looks perfect. The picture shows the product as it is drying. The uneven spots smoothed out while drying and look great. Even though it is advertised as water based, don’t expect to reuse brushes or rollers because it is very hard to wash out. I used the provided cheap roller and brush and they worked fine. Threw them away afterwards.

I used this to resurface my bathtub almost a year ago. I use the bath daily and this product has held up well. Will definitely use it again if I need to resurface a bathtub. I chose this over the rust oleum due to this being acrylic and less toxic.

I have been using this to paint my tiled stall shower. I had problems with the grout disintegrating and causing leaks. Grouted areas were prone to mould growth and hard to clean. Finally I had to repair an area with mismatched tile. Enter NADAMOO Refinishing Kit. This was exactly what I needed to finish off the repair and resolve the grout problem as well. This two-part paint was easy to apply with water clean-up despite the challenge of painting a small enclosed area like a shower. I tried to stretch a quart to cover the area I needed, but a second coat was necessary. I gave it the required five day dry time, but it seemed to be adequately dry well beforehand. The end result is a pleasant stall shower, which I elected to paint walls and floor the available beige color. It transformed my shower from a creepy questionable mould repository to a clean, bright and pleasant shower. There have been no problems since the application of the NADAMOO product. It is easy to keep clean with an after-shower spray. If you have plans for a similar project, beware any areas that have been sealed with silicone sealer. The paint will not adhere to these areas, and it is very difficult to get all the silicone sealer removed. If you have areas of your tile that need repair, be sure to use grout, not silicone.

I haven't used the product yet , but I'm happy to buy what I needed, I only have a small job and the size of the product is just right 👌🏻