Cadex V2/21.55 21 Gauge Pinner / Brad Pin Nailer 1/2" - 2-3/16" Kit WITH SYSTAINER CASE

Great little gun, I use it installing prefinished trim on cabinetry, it is a great addition to my 23g pin gun..My only complaint is I had a fabricate a piece of plastic to help protect the magazine release lever, because everytime I hung the gun on my belt, I would accidentally depress the lever and eject the magazine. After the easy mod, this is my go to gun on a daily basis

I purchased this gun in February of 2018 after reading the reviews posted here I am a stair builder - finish carpenter and have the Cadex 21 gauge and the 18 gauge Omer pinners but wanted a smaller hole with more holding power in a pin for a pre-painted crown molding project I had coming up here is what I have discovered that made me post only three stars.1) The driver head does not protrude far enough through the protected nylon tip and causes the 50mm long pins not to be countersunk2) Misfires 3-4 times on the first clip used3) Jammed two times within three clips.4) I am left handed and figured out how to switch the belt hook over by reversing the adapter but had to custom inlet a notch into the plastic systainer insert to accept the gun but still protrudes a little making it difficult to close the lid.5) Protective nylon tips are of a flawed design if not carefully inserted you will ruin them extremely hard to correctly put them on6) Bottle opener ... Why??Remedy: I removed the protective tip caps, ground down the safety tip and pushed it back to engage the trigger then inserted a spring between the trigger and part #23 trigger bumper dis enabling the safety then milled part number #32 &34 guide plate and nose down enough so that the driver protrudes enough to set the 50mm pins properly then smoothed and polished the the tips now this gun works for me you can still engage the safety if need but I never use it due to it marring most surface the polished and rounded nose does the perfect job without any marring.I recommend spraying a dry lube on both sides of the magazine where the pins travel. Look for further updates of my findings but for now I am happy with it's performance.

This nail gun is awesome I like the fact that these pens are a little more robust than the 23 gauge and have some holding power the whole is still very small you can apply small moldings in hardwood stain grade material and once you've sanded it stand it and finished it you don't even need to putty the holes.

Awesome nailer... really works well on finish cabinetry and interior trim. Note: make sure you follow the manufacturers info on reducing the air pressure to the nailer for best performance.

Great nailer. Doing finish work and no need to worry about caulking or filling nail holes - barely perceptible. Cadex makers a good product

The gun does not hammer when there is no pin nails.

Super. Worked great on putting up door trim.

Worked great