DECKMAN 115-8449 Side Deflector & 99-5293 Torsion Spring and 136-8672 Cover Rod, Compatible with Toro, Fits Model 20330, 20331, 20331C, 20332, 20332C, 20333, 20333C, 20334, 20334C & More

This item is described as is. It was easy to install, and it fit right perfectly.

Fit my Toro 20378 lawn mower perfectly

This was the second one. First one a tab broke off and wouldn't hold the discharge chute on. Pretty easy to install.

This product did not come with any installation instructions, and I really did not know what to do with the spring to get it to work for the door. After searching the internet I found a good YouTube instructional video on how to install this product. Thank goodness! The product installed well!

The new parts look to be the same material and quality as the original. I will update my review if it should fail quickly. The tabs that hold the chute in place appear to be the same shape and size so they hold the chute in place like the original.Installation tips - The golden sheet metal bracket shown in the photos is not included with this or any other replacement door for this mower. You need to use the bracket you already should have on the mower.Use a 10mm socket and remove the 2 screws from the inside of the mower deck and take entire door assembly off. Trust me, this will save you some grief later. Once the assembly is removed, take a pair of needle nose pliers and pull the pin out. Take note of where the ends of the spring are on the original as you will need to duplicate their locations.Install the end of the new spring in the door. Place the the original sheet metal bracket on the door. Start the new pin in from the open end of the door. After sliding the pin through the bracket on the one end and starting it into the spring, set the other spring end on the bracket as shown in the first photo. Continue assembling the pin through the door. You will need to compress the spring and bracket slightly to get the holes to line up.Now, here's the BIG tip! Notice in photo 1 you'll see a wrench inserted underneath the bracket That one happens to be 9/16" to give some reference to the thickness needed. Compress the spring and pry up the bracket to hold it in place. In the second photo you can see how the wrench helped out with the assembly on the mower deck. The heads of the 2 screws can be seen inside the deck.I wish you all the best installing your new door. If my tips helped you, please give me a thumbs up.

This perfectly fit onto my Toro 22” Recycler (model #20371). The spring is a little tricky to install, but there are plenty of videos out there showing you how. It fits tight to the mower body just as well as the OEM part.No instructions are included so make sure you’re comfortable performing a little tricky DIY project.

I'm posting these pics bc installation for me took way longer than it should have. I watched a video but could not figure out how to turn the spring so the flap pushed down. The key is to put the spring into the upper hole on the left then only hammer the pin in about an inch. Then with needle nose pliers, pull the other leg of the spring underneath to the top side of the deck then CLOSE THE FLAP before continuing to hammer the pin through the holes. You need to keep holding the spring end and adjusting the position of the holes to get the pin through but closing the flap was the most important part. I've attached 2 pics to hopefully help someone else.. I also watched the video by ereplacement parts on YouTube just to get a better idea..

Bad Service

Très bien pour ma tondeuse sur laquelle le morceau était brisé.