Description
- Voltage: 1.5V Need to use 2 AA batteries (product does not included sale separately )
- Feed dispenser diameter: 2.6" X 1.2" (6.5cm × 3 cm) thick. Fixing screw is about 0.9" (2.3cm) (can be the width of the folder glass) .
- Feeding capacity: Small particles (diameter 0.05" (1.5mm) and below ) feed can be loaded about 1.4 oz (40 g), each feeding about 0.3 oz (8 g) at a time so you can feed about 5 times a day. Large particles (diameter 0.1" (1.5-3mm or more) can be loaded about 1 oz (30 g) of feed, feed 0.07" (1-2 g) each time. (This data is for reference only, and may actually be different):
- According to the form of fish tank, feeding device has two installation methods. 1. Install the clamps on the side of the tank and tighten the plastic screws. Dovetail groove will be the bottom of the feeding device into the fixed folder chute, adjust the feeding position, to ensure that the feeder feeding mouth aligned fish tank openings.
- 2. Separate the two sides of Velcro, tear the sticker on the back of the Velcro, put it in the bottom of the feeder and the appropriate position on the cylinder head, and then install the Feeder through the Velcro in the appropriate position on the cylinder head, Mouth aligned fish tank openings.
Instructions: 1. Open the battery cover and insert two "AA" 1.5V alkaline batteries. 2. Feeding time setting: toggle the timer dial 12H or 24H dial can be set to feed every 12 hours or 24 hours, time from the moment the power supply or the last press the manual key moment to start. 3. Manual operation: In addition to automatic feeding function, each time you press the manual key, the device will be fed once. 4. Feeding: This device is suitable for loading flaky or granular and powder feed, the feed box open, the feed can be added. 5. Clean the feed box: the feed box can be removed, clean the box.
