Specification: Material: Spring Steel Size:138 x 85 x 0.4 mm Surface Treatment: Special Drawing How to Use? 1. Clean your build plate very well, let dry. 2. Install the magnetic cover to the build plate and put the flexible steel plate on. 3. You will have to make a 2.5mm shim. This is needed to place under the arm that triggers the Z axis to stop at home. Matters Needing Attention: 1. Please clean the surface of the steel plate before the first time printing to avoid surface stains from interfering with printing. 2. Don't use chemicals other than alcohol to clean. 3. Don't scratch the surface to avoid deformation of the bottom surface of the printing model. 4. Don't bend the steel plate excessively to avoid damaging the surface coating. Package Included: 2 x Flex Plate 2 x Magnet Sticker
M**L
good product, beware sharp edges
The product works great as intended. However, it has sharp edges because it is thin sheet metal. I received the metal equivalent of a paper cut peeling a print off of the sheet (5 stitches). Please exercise caution when removing prints from the sheet.However, I still highly rate the product for its intended use. Just be careful to not let your hands slip. Wearing gloves is a must, but it can cut through gloves no problem. I had a bottle of 99% isopropyl handy to wash out the cut.
G**.
Works well with smaller prints.
Plates do well with smaller prints. With larger prints the plates tend to pull away from the magnets.
S**E
Prints have a difficult time sticking on surface
I tried this for my Mono X 6K and I thought it may work. The magnet fit perfectly and it seems to stick to the bed surface really well. I left it on there for 2 days before performing my first print and have not been completely successful. I am not sure if it can't handle multiple prints or if the plate is only designed for single items, either way the prints have a difficult time adhering to the metal surface.
C**R
Good for light weight resin items only
layer shifting would happen and then failure of the print because the item would fall off the plate.it worked ok for small light prints but not heavy items, which is why I bought it.returned the item.
M**.
prints do not stick to the surface
It appears the metal is much to smooth so prints just don't stick to it.
W**.
Saturn S
bright this for my Saturn S and it works perfect,the mag plate had no issue holding on to a 740g print. and fits the Saturn S perfectly..
M**P
Für Anycubic Photon Mono SE
Die 135x80 passt perfekt auf die Buildplate. Die magnetische Haftung der Platte ist Top. Das Aufbringen der Magnetfolie ist ebenfalls Leicht. Man sollte nur beachten das man die Buldplate vorher Richtig!! reinigt und dem Klebstoff ausreichend Zeit zum Durchhärten gibt.
M**U
Impresionante
Ha terminado con la pesadilla de despegar las piezas
Trustpilot
1 day ago
1 month ago
