Adhesive Guru CA Glue with Activator (4x1.7 oz - 4x6.76 fl oz) - Premium Cyanoacrylate Super Glue for Woodworking, Woodturning, Plastic, Metal, Leather, DIY, Ceramic & Craft | Instant Bond - 4 Pack

I purchased this to use in making a model log cabin. The other reviewers aren't kidding when they say you better have the pieces where you want them after you apply the glue. It adheres VERY quickly! In fact, if I think there is the slightest possibility that I may need to make a change, I use another slower drying glue instead. I certainly don't say this knocking the product, because it does work great.

We’ve purchased this glue twice now. You won’t find anything on the market that works as well as this product. It’s instant. Follow directions with the spray first. It matters

The glue and spray work really well. So far I've used it on wooden dining chairs, Christmas ornaments (resin and ceramic), and soccer cleats. All held well (the cleats lasted a month before I needed to reapply, but that's on a seam, under constant twisting and pulling, used 5x a week. I'm more than satisfied with that.) The one negative is that the glue nozzle clogs in between uses. It's very small and even if you wipe the top it's not possible to get the glue out of the tip. I solved this by just drilling it quickly with a tiny drill bit to clear the clog. Otherwise the product does what it's intended to do.

[Update 7/13]: This Seller reached out to me and replaced the product. They are very attentive and stand behind their product. The glue and activator work very well. I used them to install frets in a guitar fingerboard and it turned out great.(Old Review): The glue worked fine for two small projects. The problem is the nozzle, it failed, cracked around the threads on the bottle. The remaining glue is drying up before I can use it. I barely used this product, the nozzle is made of bad plastic.

Great for instant connection on almost anything...

I should have read the reviews better.I tried to use the first bottle and since I wanted a very narrow tip I cut off just the end. It was plugged and I could not get a pin thru it. I kept cutting back trying to get an opening and had to keep going well beyond what I wanted for the tip size. I finally was able to get a pin thru but not before the tip cracked and a piece split off. I used a very small amount, 10 drops, and put the cap back on.A few days later I went to take these photos and the glue is plugged solid in the tip again.The glue might work fine but the bottle is CRAP. Do not waste your time and money on this product.

Every time I go to use it I have to clear the clog. Last time I had to take a small drill bit to it to clear it out. I wish someone could come up with a way to make a superglue without this issue.

I glued one side sparingly and used the activator on the other side. It was almost instantaneous bond. So far so good.