SpigenMag Fit Phone Holder Dashboard Car Mount Designed for Magsafe Compatible iPhones (Charger Not Included) (Requires USB-C Car Charger)

This product does what it says perfectly. Others have pointed out expecting a magsafe charger and a power supply included. This actually is not a relative con, in context.Apple limits non-certified Magsafe devices to a charge rate of 7.5 watts. It doesn't matter if the device says it's "Magsafe compatible" and your phone/case sticks to it - the phone will not accept a 15W charge rate unless it's blessed by Apple. So if a charger says it's "Magsafe compatible, 15W", it will actually charge at half that rate [7.5w]For now, in terms of a product that actually charges an iPhone at 15W wirelessly for a car that is "all included" leaves you with a single third party product at present - - that clips to a vent mount. Some may not want a vent mount, or have a vehicle suited for it. It's also more expensive and less versatile than this product that pairs the mount to a Magsafe charger and 12V DC car charger (both sold separately).This allows you to have an optimal MagSafe mount that is not dependent on a vent clip, located conveniently in the vehicle, where you want it. The adhesion force of the sticker to keep the Magsafe puck in is great, and the phone is securely mounted, but it isn't an excessive amount of force to remove an iPhone 14 Pro Max from it.I can't speak to the air clip version, but I would readily recommend the dashboard mount version of this product.

I used to have a large car mount for my iPhone the clipped the phone top and bottom and covered a lot of my dashboard.This holder is much smaller and very easy to install. In fact i did not even use the included dash mount, as the ball attachment from my old mount (where the swivel ball attaches to the dashboard) fit this holder, so I just swapped out the holders and attached this one to the ball already glued to the dashboard.The magnetic charger fit perfectly into the holder, but you have to glue it in with the included tape.(I wish there would be a way to clip the charger in without taping it, but i think that has to do with the design of the magnetic charger, not this holder.)I think this works great of you want to use MagSafe charging in your car.

This is a review of the Spigen Mag Fit Phone Holder Dashboard Car Mount Designed for Magsafe Compatible iPhones, UPC: 880981185440What is really special about this mount, is that it is designed to accept a regular MagSafe charger. So if you have an iPhone, and want to use it with an actual Apple MagSafe Cell phone charger, then this should be of interest. Third party MagSafe chargers fit snugly. However, when Apple redesigned their MagSafe charger, they made it a smidgen smaller. In either case, this product already has an adhesive to hold your MagSafe charger in this holder.Has a rounded base about 48mm long by 27mm wide with an unknown black adhesive on its plastic base for a total of about 749 sq mm (or 4.49 sq cm). The base does have some flex lines designed in it. However, the plastic is relatively hard, so it doesn't flex easily.Since this design uses the common 17mm ball socket, with the ball in the base, and the socket in the mount, its parts are compatible with the bases for a number of other mounts that also use 17mm ball and socket joints. So you can use the mount either with the provided base, or you can use this mount with many other 17mm base.Also includes a spare adhesive for the base and one for the MagSafe Charger to the mount.Suitable Applications:Those wanting to use a magnetic charger provided by their cell phone manufacturer, such as an Apple MagSafe Wireless Charger with an iPhone, and having either a suitable mounting surface, or a compatible 17mm base.Pros:Allows use of actual Apple MagSafe, or compatible chargers.Ball and socket joint (17mm ball on base) allows up/down, left/right tilt and rotation.You can upgrade to Qi2, Qi3, Qi4, etc. just by changing the internal charger puck.Reasonably PricedCons:You need to provide USB cigarette lighter adapter or other power source and a MagSafe, or compatible charger.

I use this in my vehicle. The build quality is good and being able mount it wherever is great. The adhesive is good it’ll mount to anything. And I bought it at a good price.

Falls off the dash when it is 93f outside. All i can do is just scoot it back so it rests on my dash to stay propped up and the mount keeps from sliding left and right, i had it holding my phone suspend over the dash console before. Save your money and steer clear.

Not good at all. It keeps falling off the dash. It don’t think it is the sticker issue because I tried 3 different stickers and still fall off. I think the base is too small for the weight. There isn’t enough sticker area to support the phone weight, my phone is iphone 13 and I think most of the other phones is in the same weight rangeToo expensive for a mount that I keep trying to secure on the dashI’ll return it

I wanted a perfect setup for my mounting needs and this has really worked out well. I matched it with Apple's magsafe charger and it fits really well.

It’s an okay product. It would hold the MagSafe puck pretty well especially with the sticky part holding it in but the range of motion isn’t the best. I used the adhesive part so the arm that is bent would restrict the range of motion it would have. I ended up returning this and bought a different one that would friction hold the puck and was mounted onto a ball with a base that I stuck on which in my opinion is much better. I like the spigen phone cases and stuff but this was not my favorite.