Woodworking Dust Collector, 5.7-Amp Motor with 12-Gallon Bag, Mobile Base, and Optional Wall Mount (DC3401)

This worked great for my planer and table saw dust collection. I was worried but it worked out great.

Works well and was what I needed.

This works I will keep it due to the value for the money. Only issues I have is that it needs new carbon bushings approx every 250 hours. And 2ndly they don't recommend using a planner due to larger dust particles and that u should purchase a cyclone if u plan to and connect to it. If I was to get a cyclone then I wouldn't need this a shop vac would suffice.

I love this thing. I mounted it on the wall to save space, and it really sucks. I'm using 2 of these in different spaces in my shop to replace a 2 HP grizzly dust collector that was just too big. It's not as powerful as the grizzly, but there's 2 of them, and now I don't have 50 ft of 4" pipe running through the shop, which tended to reduce the sucking power of the big dust collector. I did replace the bag with a 1 micron bag with a window (5" opening works fine) which works better and also you can see if it's full. Also, I'm using a 4" clamp with thumbscrews on them so it's easy to unscrew it to empty the bag. I use this on a tablesaw, router table and bandsaw. This moves way more air than a shop vac - I have a rigid shop vac and it would not move dust out of the tablesaw/router collection area like this will. And the good news is it's really small, especially when on the wall.

I've had this for 9 months. I've emptied the bag 3 times, and am nearing the 4th full bag. The motor bearing is failing and now barely works. I've contacted WEN, but it's been TWO WEEKS and I've heard nothing, so I'm not sure what to think. Terrible customer service. Honestly, I'm not sure how good this is. There's a 1 star review here that says it can't handle 2 tools, which is absolute nonsense. I have a splitter to two 2.5" hoses. I use it on two tools simultaneously all the time. From my table saw and planer, to my band saw and multiple sanders. However, what I notice is that, compared to a vacuum, when you make the hose smaller, like for my orbital sander, suction decreases, whereas in a vacuum it increases. It's really weird. Some people say it's quiet, but I've found it's pretty loud. Sure, I can't hear it over my table saw, but I can hear it through the outside wall of my house, and even in my neighbor's house, so...

After 2 months of use with my CNC Machine died. However, I did do the whole contact the retailer and much to my surprise, they contacted me back pretty quickly and sent me a new switch for it, which was the problem, and now it is running good again , performance wise, it has comparatively good suction, I have it connected to a 20 foot 2” hose and it does great extracting dust. The one thing I will say about the system is that the screen on the motor is about 1/4 inch wide, meaning it will suck up jut about everything but if its 1/4 inch or wider it will stop at the motor, which in turn causes a dust backup. The screen is needed to protect the motor. It wouldn’t be a bd thing to hook up one of those cyclone buckets if your planning on using it for shop clean up. Anything but dust going through this has the possibility to become a clog.I use it not only for my CNc, but my thickness planer, jointer and chop saw no it works great. Sometimes with my thickness planer, due to longer string like sawdust, it clogs, but it’s quick connect comes off and easily cleanable. MAKE SURE IF YOUR ORDERING A VAC- ATTACHMENT THAT IT IS A MALE connector, the 3 or 4 inch opening on the unit is female.

This dust collector has worked well. I have it hooked up to my compound miter saw and it has done a great job for the last couple months

Downsized a few years back and let several things go, including a 2 HP JET dust collector. When I got a new planer recently, I had to have something better than the canister vac. I was prepared to be disappointed, but I'm not. Plenty of suck for the planer and drum sander. Surprisingly good with a SawStop PCS. Not enough keep the top clean, but great for the cabinet. Pleased enough I think I'll get a second one just for the saw.

No funciona bien. A los 5 seg de encenderlo se apaga. El vendedor, después de enviarme 2 veces una etiqueta de devolución errónea que el transportista no admite, me dice que estoy fuera de plazo para devolverlo

I’ve had it for a week now. No issues works great good suction. Great for small spaces

Muy buenos materiales, buena potencia como para usar de una herramienta a la vez, pero recomiendo usarlo con separador ciclónico.

Its 110 Volt not 220 Volt . I send it back.

Over a year, no issues