GEEETECH Mizar S Auto Leveling 3D Printer Support Klipper Firmware, Dual-Gear Direct Extruder FDM All Metal 3D Printer, Large Printing Size 10.0"x 10.0"x 10.2", Fully Open Source Filmware, Dual Z-axis

I'm an experienced maker, own a small print farm, and have printed several hundred rolls of filament and know my way around FDM machines very well. After you have been a practiced 3D maker for long enough, you can make most machines and filaments work for you. But I'm here to say this machine rises to the top as being uniquely friendly for beginners:PROSeasy assembly. Wires in place and labelled so you know exactly what to plug in whereMANY features (specifics below) that are provided with the Mizar S but are upgrades on other machinesFlex steel magnetic build plate (a mandatory upgrade on most other printers)Larger than average build plate: 255 x 255DUAL GEAR extruder...again, a mandatory upgrade from other cheap entry machinesBed (aluminium/steel) heats up FASTBright LED for themistory and heater cartidge. Easy on my aging eyes to service.* LED can be white, off, or changing multicolor!Pressure sensor (load cell?) makes for easy ABL (auto bed leveling)QUIET! This is a feature that you dont always get with other great machines.* upgraded 32 bit motherboard with TMC2208 silent driverFilament detector included! (you dont get that with a $300 E3V3KE (or SE))Prints essentially all filaments including ABS, Nylon and Carbon fiber (and PLA and PETG of course)CONSFor the price this is a great value. Im struggling to find a con considering the value of this machine.9 point auto leveling. Good. But not great. I prefer FW that has at least 5 X 5 point ABLFilament spool...placed at top of machine like most other brands. But that is a small flaw. The weight of any spool on top of any machine can cause VFA (very fine artifacts) from resonance. I recommend always moving a spool off of the frameNOTE: I also like Geetechs filament (AKA GIANTARM). In fact...they make the easiest glow filament to be found today IMO. Good adhesion and strong color

This printer is a phenomenal deal at the price point. It’s packed with features that make it a truly impressive printer. I have quite a few DIY friendly printers like this one and it would cost WAY more money to buy a base model and upgrade it to match these features. I can’t believe how quick it was to setup. From unboxing to printing it only took me 26 minutes! My first printer back in 2018 must have taken me 3 hours to get to this point. It’s amazing how far we’ve come! 😁 Overall this printer is a 10/10! Also included are pictures of a calibration cube that was printed immediately after setup. With no tweaks, the printer was able to be impressively accurate. Pros -True Auto Bed leveling (no manual intervention) -Dual Z -Dual Gear Extruder -95% pre assembled -Easy knobs to adjust X and Y axis -Magnetic bed -Touch screen UI -Switchless sensors on the Y and Z axis which won’t wear out over time -Quiet main board Cons -Filament runout sensor leads are very fragile. Be careful when installing the connector. I had to disassemble the runout sensor and bend the pens back into place. This was very easy to fix and only took two extra minutes to accomplish. -No network connectivity

This product is amazing, I have been trying to find a 3D printer that was cheap, and trustworthy for two whole weeks. When I got this product and opened the package I immediately knew when this thing is 95% pre assembled, they really meant it. Literally when I took all the parts out it only looked like the 3d printer was apart from the frame (with nozzle parts pre attached), base, and spool holder. So when I say that this was easy to assemble I mean it only took me around 20 MINUTES to assemble! All I had to do was put screws on and put wires into the slots that the highly detailed, Lego-like instruction manual. Also the cost is something awesome to brag about too, literally I recently bought a 3D printer for 311 dollars, returned it because it was a literal piece of junk, and bought this one for only 256 (when I applied coupon and got past taxes). The speed of this 3D printer too is UN-imaginably fast as well.For example, I recently printed a die that I thought was gonna take 50 minutes (due to me having a slow 3D printer). But this took only 10 minutes to 3D print! However, just because this thing works at the speed of the flash though doesn't mean that the detail was gonna look bubbly or have multiple lines. Well to how the designs look to me, I'm pretty sure that if the lines look practically not noticeable, this means they speed and detail remain to be the same. But finally, one of my favorites, touch screen controls. Theses touch screen controls allow you to do anything you want with the 3D printer. You can increase the heat of the nozzle or bed, auto or manual level, cool down the nozzle after 3D printing, load and unload filament, move the extractor or bed in any direction it is possible for them to move in, and even more that I think it would crash Amazon if I listed them. Best 3D printer ever purchased.

A impressora aquece só não imprime

We have just completed our first print. We are 3d newbies. This printer first of all was so well packed and a joy to see a booklet of great instructions. It was easy to set up, which I took slow as didn't want to mess up. It comes with a memory card with 3 test prints included. We did the owl which took a couple of hours. The first print was perfect. The quality of this printer is top notch engineering as far as I can tell, it feels solid and sturdy. We really are over the moon with this. It really was a doddle to set up.Edit.. A few weeks on and we are still over the moon with this printer. We did come across a couple of problems on our learning journey, but that was due to our inexperience. This is still a fantastic printer and we'll worth the money. There is a myriad of printers out there on the market and it's difficult to choose a good one. This is excellent.

The media could not be loaded. La Geetech Thunder è davvero la mia stampante 3D preferita, e per diverse ragioni. La qualità di stampa è un vero spettacolo, con dettagli incredibili e una chiarezza che evidenzia la precisione della macchina. La velocità di stampa mi ha lasciato senza parole, completando progetti in modo fulmineo senza compromettere la qualità del risultato finale.La Geetech Thunder è costruita con una qualità e una robustezza che si fanno notare fin dai primi utilizzi, conferendo una sensazione di solidità e durabilità che dà fiducia nella sua longevità. Il piatto riscaldato è un'aggiunta brillante, consentendo una varietà di materiali e aprendo nuove possibilità creative.La funzione di auto-levelling è un vero vantaggio, semplificando notevolmente la preparazione per ogni stampa. Tuttavia, devo sottolineare che l'adattatore microSD incluso è un po' datato. La buona notizia è che su Amazon ho trovato un adattatore di qualità a soli 5 euro, con consegna il giorno dopo. Un piccolo investimento che ha risolto facilmente il problema.In conclusione, la Geetech Thunder è una stampante 3D eccezionale con caratteristiche avanzate che la rendono ideale per chiunque voglia esplorare il mondo della stampa tridimensionale. La sua qualità, velocità e versatilità la pongono in cima alla lista delle stampanti 3D sul mercato.

Points Forts :1. Haute Vitesse d'Impression : L'Imprimante 3D GEEETECH Thunder offre une vitesse d'impression impressionnante allant jusqu'à 300 mm/s, permettant des résultats rapides sans compromettre la qualité.2. Haute Précision : La précision d'impression élevée garantit des détails fins et une reproduction fidèle des modèles 3D, offrant des résultats professionnels.3. Contrôle en Boucle Fermée des Axes X/Y : Le contrôle en boucle fermée des axes X/Y assure une stabilité accrue pendant l'impression, réduisant les erreurs potentielles et améliorant la qualité du produit final.4. Mise à Niveau Manuelle et Automatique : La possibilité de mise à niveau manuelle et automatique rend l'ajustement du lit d'impression facile et accessible, assurant une surface d'impression parfaitement alignée.5. Volume d'Impression Spacieux : Avec une zone d'impression généreuse de 250 * 250 * 260 mm, cette imprimante offre suffisamment d'espace pour réaliser des projets de grande envergure.Points Faibles :1. Nécessite une Certaine Expertise : En raison de ses performances avancées, cette imprimante 3D peut nécessiter une certaine expertise pour une utilisation optimale. Cependant, cela peut être considéré comme une opportunité d'apprentissage pour les passionnés.De plus, comme le montrent les photos, l'imprimante est déjà presque montée, l'assemblage est donc facilité !

J’avais une imprimante 3D il y a quelque temps qui avait tout donné lors de l'épidémie de Covid pour imprimer des visières. Je cherchais une imprimante nouvelle génération facile à utiliser et de qualité. J’ai fait le choix de cette Geeetech.📦 Le colis est conséquent mais c’est surtout que l’imprimante est très bien protégée.Après un montage assez simple, j'ai rapidement pu mettre en oeuvre les fichiers d'impression proposés sur la carte microSD fournie. Sans plus de réglage, le résultat est vraiment très bien, le tout dans un environnement sonore très raisonnable.Ce que j’ai apprécié :💚 La machine arrive vraiment bien protégée.💚 L’installation est assez facile. Il faut juste être vigilant lors de l’installation du portique sur le plateau. Il vaut mieux être deux pour cette étape.💚 Le système "auto levelling" est très efficace. Je n’ai rencontré qu’un seul problème de décollement, j’ai relancé le levelling, et c’est tout bon depuis.💚 La carte mémoire est fournie avec 3 fichiers prêts à imprimer, et le profil Cura qui permet de préparer de nombreuses autres impressions.💚 Je découvre ce type de plateau chauffant et magnétique, tellement pratique au quotidien.Ce que je regrette :⚠️ Il manque la version française du guide papier pour avoir les bons réflexes pour détacher correctement ses impressions sans abîmer le plateau.Je suis très satisfait de cet achat qui nous permet de faire des impressions de qualité et devrait permettre à mes enfants d’accéder en autonomie à ce loisir.