6 pc Front Suspension Set (1) K80306+(1) K80308+(2) K80149+(2) ES3691 - Control Arm, Ball Joint, Outer Tie Rod for 2004-2008 F 150 2006-2008 Mark LT

UPDATE:I changed my oil and wanted to grease the tie rods and lower ball joints. I gave the grease guns a few pumps but no grease came out. There is no grease relief hole!!!! All the grease will fill up under the rubber boot and not come out. Of the four parts I greased all of them filled the rubber boot. If I would have drive the truck as is it would have blown the boots clean off. So I squeezed the boots until the released the grease and it was like popping a huge zit. Again, economy parts, so be careful when you need to grease them.All parts fit my truck (2004 F150) but there are issues.First, the lower ball joints do not have a wide enough flange for a press die to sit in. You will pinch off some rubber and most likely end up starting to feed into the lower control arm crooked.Second, the tie rod ends have grease nipples, but the grease relief it not marked... where will the old grease come out at? Better quality ball joints have clearly marked grease ports where it will exit.Lastly, the grease nipples for the tie rods are non-standard size and straight. On my F-150 I need a 90deg nipple (which I had) but the MOTORMAN threads are not 1/8th in (they must be metric??).I don't know how long these will last... they have grease zerks, but I would definitely label these a ECONOMY parts. And for the price that's about all you can expect

Despite what I read in other reviews these parts did not fit my 2008 F150.xlThe lower ball joints would not drive in straight and started to damage my lower control arm. the flange is way to small to use any conventional ball joint press tool.The rubber boot fell off .I threw them in the trash ,bought some Moog ball joints and they were in place 10 minutes a side.The tie rod ends were totally wrong ,drop rod was about 1" too short.Again ordered Moog ,more expensive but the parts always fit perfect.My fingers are crossed that the upper control arms work when it finally goes together.I just wanted the truck to last another 30 k miles so I didn't spend the money on life time parts.big mistake.

Perfect better than OEM

Delivered on time as expected. Based on first impression, quality materials and all installation parts included.

It all fit good

All fit to the t,