Rev-A-Shelf 14" Pull Out Belt and Scarf Closet/Cabinet Organizer with 6 Non-Slip PVC Coated Hooks and Easy Mounting Hardware, Chrome, CBSR-14-CR

Matches the CVL-12-ORB 12" valet rod if you need to complete the set.I got these along with the above valet rod to put the final touches on a closet project and am very pleased. I have 2 installed one above the other. The top is for ties and the bottom is for belts.Sigh, made in China....But the quality is very good: heavyweight metal, very durable, should withstand a lifetime's use. The curved hooks have a very nice, thick non slip rubber/vinyl finish applied to hold your belts, ties, or scarves in place and keep them from sliding around or falling off...very nice touch. They look great installed and add that extra organizational touch that will make your closet more functional and neat.Installation is a snap: Install the 2 support mounts, slide the assembly in, tighten the assembly into the mounts and done. TIP: I painter taped the supports to the assembly, leveled it, and marked where I needed to drill.Minor quibble (and with the valet rod also): If you zoom in and look closely, you'll see some white plastic above the 1st 2 belts in the photo. This is a cosmetic eyesore. But it's also one of the reasons this the least expensive valet you'll find. The plastic insert allows the assembly to slide in/out and is cheaper than ball bearings. TIP: I used an indelible black marker to "paint" over the exposed parts of this plastic slide prior to installation.Even if you don't do this, I would highly recommend this piece of hardware.

I actually bought two of these. I use one for my belts, and my wife uses one for her necklaces. Mounting is easy, just review the installation in your mind first and make sure your holes are level. Good quality. The hangers slide out to make your selection and back in again out of the way. The individual hooks are coated with non-slip plastic, so things hang securely without sliding off. You can hang 3-4 belts per individual hook, and it holds all of my wife's necklaces securely with room to spare. You can use the end as a valet rod in a pinch. Attractive and handy.

It's very heavy, sturdy and I think well made, certainly a great accessory for a closet. Mine came with mounting hardware and 1 tiny tiny screw bar, but not the micro screws that stop the bar from sliding right out of the mounts. And no instructions beyond mounting. I'm not sure how to use it with no slide stops. It slips right out of the mounts, when pulled. And there's no way I'm gona find the right size micro screws anywhere to fill that tiny hole. Weird.

Heavy and well built. Wish the slide was a bit smoother, but works well for what we intended in master closet. Recommend.

Looks great - works great - although you cannot load it up with too many belts as it makes it hard to open - but it you lift up a bit on the hooks it slides out easily. I have tow others for scarves and a valet and they work perfectly.

It was excessively heavy and had to be returned.

To install this the direction shown, you must remove the inner fittings and pull knob, and put it on the other end of the rod. Each end of the rod is slightly different, so you cannot just put the pull knob on the other end: and the ball doesn't attach as firmly to "other" side. But, if you want the rack attached to the LEFT inner side of a cabinet, you're in business as soon as you pull it out of the package.Otherwise, this is a really nice rack. Each hook is nice and deep, holding 4 of my thinner scarves or 4-5 men's belts. The slider mechanism is smooth and easy, and it's built to prevent pulling it out so far that it comes loose. (Like a drawer stop prevents pulling a drawer out too far).

Works as expected. Keeps closet organized.