BUNKER INDUST LED Fog Light with Daytime Running Lights for 2014-2015 GMC Sierra 1500, OEM Bumper Driving DRL Fog Lamp Assembly Kit

They look and perform great. Wiring was extremely easy. However, you have to take off the entire fog light hosing to replace. And to get to the 4 small bolts behind each one which requires you to take off the entire front bumper. FYI!

Let me start by saying this setup is very well made and everything fits perfectly. As you can see the fog lights come with the whole trim but I decided not to use all that since everything is already on the truck. I separated the actual fog lights from the trim and used the original adjustment screw, it all went in as OEM. The wiring is not a direct plug in but it does come with a positive and negative plug. Just tap into the original fog light wiring and it's good to go. These have dual led bulbs in each and as you can see they are very bright and have a nice cut off line. I haven't fully adjusted them yet but it's very simple to adjust, just use a short phillips head screw driver from under the truck. Overall I would say definitely get these over the other similar ones. I had a similar setup prior to these which only had one bulb inside and those didn't last a year before the bulbs burned out. The last picture is at night driving with just the fogs on. Camera makes it look brighter but they are definitely bright, could see the road nicely.

Please Slice the Purple End of your connector. NOT THE CONNECTOR TO YOUR VEHICLE. Only the one that is connected to your Fog Light(s). You want it to reconnect to your Pig Tail to your Vehicle. If you want the L. E. D. around the two bulbs to come on separately than the ring. All you gotta do is buy more parts. Daisy Chain Fuse Connectors. If not like me. Just connect the yellow wire to the red wire and the ring and two strip lights will come on all at the same time. They're bright. But not as bright as everyone says. Also get rid of the holding harnesses. Jus need the bulbs.

Will work for 2500HD with some simple housing modifications.

UPDATE - burnt out after just over 2 years. Forgive me if my math is a little off but, 50,000 hours at 24 hours a day usage would be just over 5.5 years life expectancy. I've put less than 600 hours on the truck in the last 2 years. 600 total engine running hours. Less guestimate 50% was with the lights on as my drive into work is about 6AM and drive home 3:30PM. These lights lasted less than 300 hours. A bit of a pain to install, but that's not the fault of this product. Fitment is great as is the lighting.

No me gustó que no trajiera instrucciones por qué los adaptadores eran distintos y trae dos conectores y no sabía dónde conectarlos, tuvo que leer una comentario que puso otra persona para saber cómo conectarlos. Le recomiendo que lean los comentarios para que sepan cómo conectarlos

Very good Quality

Wasn't an exact fit but extremely close. Housing just a tad smaller. No adjustments needed though. Extremely bright and halo effect is nice. Comes with extra wire for halo. Just splice into the gray/blue and brown/blue striped wires on headlight (2nd from bottom left of headlight plug). Hardest part was removing the old housings.

So far works good 👍

Awesome looking lights but after only 4 months the inner lights stopped working ... now both sides are not working just the halo lights are working what a shame 😑

Muy buenos faros de niebla le dan buena estética a la camioneta y buena visibilidad en la noche los recomiendo 100%