Peygran Tile Leveling System Super KIT 1/8 (3MM) Includes Pliers/Tool, 400 Clips, 200 Wedges and Handy, Durable Bucket. Lippage Free and Perfect Tile Installation for Professionals and DIYs.
Manufacturer | Industrias Peygran |
Part Number | SUPERKIT 1/8 |
Item Weight | 8.32 pounds |
Package Dimensions | 12.99 x 9.69 x 8.11 inches |
Item model number | SUPERKIT1/8 |
Is Discontinued By Manufacturer | No |
Size | 1/8" (3mm) |
Batteries Included? | No |
Batteries Required? | No |
R**D
Works great!!!
We couldn't have done it without this system!! Huge time saver and quality results
T**T
Very good system that does solve a problem
Lippage. Now I know what it means. Didn't know before, and I had done tile in the past-- and that method needs to be left there.So I have installed floor tile and wall tile with varying results. the biggest issue always persists is that the edges never quite line up as they should. You can get close... but I am just not that good and I always have a learning curve between projects as it seems years between them.This time around was wall tile. 18x6 and a whole lot of them. The walls were done correctly, but my God--- nothing is every right as I have found out before. In this case it was no different, but using this system made all the difference. At first it was like riding a bike--- took a few tries and had to think it through, but once you get rocking along... it is fast and four things happen..... First the spacing is consistent as long as your tiles are. I had a few trouble ones, but that is the nature of the beast. Overall (99%) of the time it was 3mm (1/8") as expected. Second is flatness. The ramps are stiff and are strong--- so it definitely pulls the tiles flat. That is the key-- everything is flat. Run your hand over it, put a straight edge on it flat. Bliss. Third, you will run out of spacers faster than you think, so buy plenty. Forth thing that happens goes along with the spacers, you will also run short of the ramps if you intend to go further than you thought.....that is how I found out both of those things.So in the end, the kit worked great and out of 800 clips--- 1 broke during install otherwise it was slip, set, click, go. Again, it made what was normally a tough job to make everything level....a much easier job to make it level without a doubt.Would I use it again? Yes. It actually made the job much more pleasurable than it had been in the past. I can say someone that is an expert in the field will be able to do a great job without them...but I would never attempt another tile job without having them as they are that helpful.As far as thinset mortar--- started out with whatever HD sells premixed...and was complete garbage. Ended up heading to Lowe's and trying Mapei brand....so much better. Used the premixed to save myself from one more step, but between it and the spacers--- the job came out great!
D**.
Great product for the DIYer
Before purchasing Peygran Tile Leveling System I did my research. I have done tiling projects before but I have always used the little + shaped spacers which I found difficult to use and hard to remove one the tiling was done. In addition, I typically had to remove tiles during the process to either add or remove thinset so I could have a level floor. The Peygran system made the entire project much easier.My project was a fairly large one in an L shaped kitchen. Once I laid out my reference line and laid a few tiles, I was able to complete the job faster because I was confident the tiles were level (after checking from time to time). so I could move on to the next tile, or row of tiles more quickly. Using the Peygran system not only kept the tiles level but, as you can see from the photos, the system kept the grout lines were very straight over a distance of 14 ft. and around the L shaped kitchen. Also, if you follow the directions, and watch a few YouTube videos before starting there is no removing tile to add or remove thinset. Removing the leveling system was also faster, instead of trying to get those small spacers out of the grout lines you just hit the tabs and wedges with a rubber mallet, or kick them off with your foot and sweep them up. All very quick!This is definitely more expensive that the old + shaped spacers but the time savings was worth it in my opinion. Overall, I am very satisfied with this purchase as a DIYer, but professionals may want the more beefier products out there with larger clips and wedges because they will be used more frequently.
L**R
Great idea a little pricy
Bought these for a bathroom tile floor because the tiles had very square edges and my wife wanted 1/16 of an inch spacing. The tiles were about 12 x 12 inches and over a decoupling membrane. And 400 clips does about 100 square feet of tile depending on how you use at the edges. The system is pretty good at holding the tiles in place and leveling the edges. Actually my biggest beef in floor tiling is getting the tiles not to move after being set in place. However I ended up using by eye alignment because other methods were hard to set up over the decoupling membrane. That worked out fairly well. But for me the issue was I could not do the whole floor in one shot. So between the mastic that was on the edge and trying to set clips for the following tiles it is tricky to say the least. When the tile is set you break out the clips with a rubber mallet. 50% don't break out cleanly but you can pull the remaining side usually very easily. If you have hardened grout this becomes more difficult. The first time after 48 hours it was good timing because the mastic had not dried and clean up when well. When I did the tile around the edges the mastic set much harder at 48 hours and a few clips were hard to remove and would have affected grout. Also 2 clips broke prematurely while setting the tile. So does a great job in leveling, you still need skill in setting the tile. The wedge holds he tile in place very well. But it adds time and expense to the whole project. I knocked off one star mainly for price. I found similar systems at 1/2 the price but I went with this based on reviews.
M**C
Excellent product
Really easy to use, I used it to install 29”x 29”‘porcelain tile on my wall and 6”x 36” ceramic tile on the floor of my bathroom. All tiles were square and leveled. I recommend this product.
D**D
Costly but worth it!
I like everything about these clips, I could never believe how I got along without them for so long. They work perfectly! Other than the price and having to buy new spacers for every application, these are the best I've ever used.
R**S
Perfect job every time!! Although a bit pricey
Easy to use! Makes tile job perfect!! +++ expensive. Not sure if it’s $$ this site or just this particular product
J**S
This is a highly reliable product.
This is a highly reliable product. Not a single clip brock during tile installation. Although the price is a bit on the higher side, this product is highly recommended.
W**.
Durable clips with lots of flex.
Great product. Other systems I’ve used have brittle clips and break under tension or from bending in the bag etc... Breaking a clip while adding tension is a huge pain in the ass that requires lifting the tile the replace the clip. I’ve used hundreds of Peygran clips without failure! Buy this system. It works great. 2mm for walls, 3mm for floors.
Trustpilot
2 weeks ago
4 days ago