Description
- About this item 【NOTE】: Because this product needs to weld the Nixie tube or tube seat, make a shell, etc. , so buyers are required to have a certain amount of hands-on ability. (without tubes). Insulation must be done before DIY production, the motherboard is easy to be broken down by hand static electricity. 【Tips】: The battery used in the remote control is CR2025 3V, and the battery used in the integrated PCBA is CR1220 3V(Keep time running when power is off). Since the battery power will continue to be consumed over time,If the battery runs out of power, the customer needs to replace his own battery. This board is the core board of the universal Nixie tube clock. It integrates all the functions of the Nixie tube clock including the boost module. As long as a board is added to the Nixie tube, a complete 6-bit digital Nixie tube clock can be made. The clock uses the DS3231M, built-in crystal, and accurate timing. The boost part uses the MAX1771 high efficiency scheme, low heat (inductive hand can be in long contact).Single-chip machine with STC15W408AS, with anti-cathode poisoning program, delay shutdown, timing switch machine and other functions. Use remote control to adjust the time, or switch the machine. And with an external infrared probe and DC power interface, it is convenient for users to make a shell. Using a 9V or 12V, 500MA or more power adapter, the interface is DC5.5*2.1; The small size about 4.75x1.26x0.55Inch, it easy to fit into a smaller DIY housing.
QINIZX Nixie Tube Clock Remote Control Board Motherboard PCBA Kits 6-Bit Digital Clock Fit for IN-12 IN-14 IN-18 QS30-1 Vacuum Tube, Handmade DIY Retro Desk Clock, NO Tubes
