Hose Clamps, Hose Clamp Box of 10, Radiator Hose Clamp, Silver, Size SAE 28

This hose clamp is well made and of good quality stainless steel. I would consider it to be a heavy duty clamp as compared to the ones sold at the local hardware store. The hex head is larger than most other clamps of this size and also has a screwdriver slot for tightening the clamp. I used a ratchet to tighten the clamps and was able to apply considerable torque without damaging the clamp. I'm very pleased with the quality of this hose clamp.

These are great screw drive clamps. I used for installing a radiator hose in my car. It can be opened up to slip on a radiator hose by loosening the screw with a screwdriver or socket wrench and tightened in place after you re-position it. Much easier to work with than spring clamps and seems to provide a better seal.. Material is stainless steel so it is strong and should last a long time. Highly recommend!

I've had many clamps that strip when attempting to tighten, these are very sturdy and functioned as expected.

They work ok just not as strong as US made

You can't beat these for the price. And the availability. Good fit with the correct size.

These are high quality hose clamps; wide with a large screw. I purchased a couple boxes of #10's; use them a lot.

Purchase on Dec 26, 2021Installed on Dec 29, 2021For: 2005 Hyundai XG350LIssue: Coolant Leaking From Hose at Old ClampSymptom: I had a noticeable leak at my radiator hose connection, near the original clamp. Parking area was getting wet from leaking coolant.First Review:Jan 14, 2022After replacing with these clamps, I was able to stop the leak. The band is stainless steel, but the worm drive is a different color and does not look like its stainless steel. Hardly rains in my neck of the woods so not too worried about that part getting contact with moisture. How long it will stay rust free, only time will tell.Helpful Hint: When I took the old clamp off and removed the hose, there was a lot of crud around the metal that the rubber hose goes over and inside the hose itself. Scraped and cleaned all that off and replaced with these. And no more leaks. Just in case, I used two clamps mounted in opposing directions to make sure I had good contact and proper seal.

Decent hose clamps. Nothing wrong, nothing super fancy, just good hose clamps.