Grease Tray with Catch Pan - Dyna Glo Grill Replacement Parts, Adjustable Stainless Drip Pan for Gas Grill Models from Dyna Glo, Nexgrill, Expert Grill, Kenmore, BHG and More (Width 24"-30")

I ordered this to replace the original drip tray that came with my Expert Grill BG2824B. The original was galvanized steel and began staining and rusting soon after put into service. I set this one up for 26 inches to fit this grill. It fit perfectly and is what should have came with this grill. It is very easy to sweep the drippings right off of this down the hole into drip container. No grease leaks under the grill. When assembling it, make sure all three parts of it are as close together as possible before you tighten the screws. It looks practically seamless and works perfectly with this particular grill. I am a happy customer indeed. Excellent quality, beautiful look and easy to clean up.

I’m prompted to write a review because I was so pleased to find this affordable, compatible part, to replace the completely rotted out original drip tray and grease catch that came with my Dina- glo gas grill. I wasn’t expecting this nice replacement- I thought it would be random metal, that would likely rust like the original, (which had completely rusted through, as had the grease catch that attaches below it.). This is one is stainless steel. Came with a simple page of instructions, and sturdy hardware nuts, and bolts. All I needed was a Phillips head screwdriver. Took 15 minutes to peel off the anti-scratch wrap, which covered the four different pieces entirely. (That took the most time)- the tray assembly took five minutes. (I’m a senior citizen with arthritic hands). Good value for the money at $25. Looks nice. I compared this to other offerings - for example- a single $16 soft aluminum tray like we buy at thanksgiving and will only give you a couple uses, and other that we’re more expensive, are made of other random metal. So This seemed like the best bet. The tray has sliding adjustment so easily fit in the slot under the grill. (I used the old pan as a guide to make sure the new one would fit in the tracks before I trashed it- so that made it super fast). Then I just loosely inserted a couple of screws and tested the fit before I tightened them up. Also make sure that your account for the flexible gas tubing that goes from the tank to the starter but that was really simple, since that flex to is actually adjustable on my grill and probably yours I also put silicone mats on both side sides of the new tray for ease of cleaning as I just throw those in the dishwasher or wash out the sink. The only caution is to be careful taking off the wrap and assembling because edges are sharp. Photo below shows the assembled sheet as I was sliding it in, and then one that shows the catch tray underneath, which also slides in and out for cleaning.

Fit our grill very well. Was easy to install

Great product. Easy to put together. BUT…..all the parts are covered with a plastic film to keep it shiny (I do not know why something that sits in the bottom of a grill needs to be shiny) and it is really difficult to remove.

Great fit on our Kenmore bbq. I recently noticed debris inside the cabinet near the propane tank and saw that the old pan had rusted thru in a couple of spots. I adjusted this to almost max width and it fits perfectly. I did omit installing the catch pan as the original pan is much larger and is directly below the drain hole. Being stain, I'm expecting this to last longer than the original. Be warned that the metal is on the thinner side and edges are sharp.

Nice quality, easy to assemble, stainless should last longer

Instead of tossing my old charbroil style, but I bought it from Aldi grill I was able to put this in the bottom and I took a ton of photos showing you the differences and measurements and things plus my bloody bandage from getting my finger skin almost cut completely off, so don’t stick your finger in the hole on it I’ll do my best to try to upload construction photos and hints of how to play it safe It is very nice and it fits wonderfully and it brought life into a grill so by investing $100 I don’t have to go out and buy a $300 infrared grill The work is phenomenal and I used to be a machinist so I’m very pleased with all of the bends I highly recommend this unit is one of the nicest ones I could find and being able to adjust it. Different sizes is a real blessing. Buy it you won’t be disappointed and don’t forget you have a Amazon 30 day return policy just wear some of those cut proof gloves, it’s sharp

3 Stars because edges are sharp as razor blades, recently went to clean the grill, and pulled this out. I now have 5 bandaids on my fingers. The edges need to be curved or have a silicon on the edge because it can cut you badly. Only plus side, it does fit the grill. Also, please make it wear the plastic film is easy to remove.