Guyker Guitar Tune-O-Matic Roller Saddle Bridge Replacement Part Compatible with Gibson Les Paul LP SG Style 6 String Electric Guitar - GM005, Chrome

I carefully took my measurements and was very happy when this roller bridge dropped right into place on a Grote brand guitar that I also purchased on Amazon. I kept the original mounts and screws affixed to the guitar and the OEM screws fit the bridge perfectly. I highly recommend avoiding changing out the mounts, especially on one of these budget guitars of tenuous construction. Height and intonation were very easily adjusted once in place.

Fits my new Guild Surfliner Deluxe perfectly and works well with the tremolo. It was a pop-in and I didn't need to change the studs etc. Intonation was easy since out-of-the-box this bridge resulted in flat notes, so it was a question of turning the intonation screws clockwise until you get it. Once you get the first string intonated, the others fall in line quickly.

I purchased this saddle for my Epiphone SG to improve an already decent guitar. The old saddle was fine. Nothing really wrong with it, but I wanted to check out the roller style and see how if was. I was not expecting the reduced tension on the strings to be this noticeable! Bends come so much easier now. This is where my issue comes in. The plastic stock nut is not cut out for the extra oomph bends now have. So I naturally had to complete the upgrade by ordering a Tusq nut. Which is why I say this saddle works too well. I was eventually going to upgrade the nut anyway, but this purchase out of curiosity ended up moving that timeline up. I highly recommend this upgrade! I didn't even have to swap the pegs. I just took thenold saddle off and popped thisnone on, then made slight adjustments for intonation.

PROs: fixed a buzzing sound the stock bridge had. the rollers really make bends easier. intonation tuning - it was almost spot on out the box, just had some minor adjustments. now what im surprised about is the guitar has much better resonation now. definitely hear an acoustic improvement. tuning is staying good so far CON: the threads on the posts were binding due to poor manufacturing. if i didnt have a metric tap and die set, id have returned this (or use the original posts). the post thread is m8x1.25 if anyone is wondering, same as my epi LP stock bridge. the new bridge does fit perfectly on the old posts though, so if you're doing a swap, you could keep yhe old pegs on and just slide the new one on. swapping the bridge is super easy. but if you're unfamiliar with doing a proper guitar setup/tuning intonation/setting the bridge to the right height, there's tons of YouTube videos, or have a tech do it for you.

Excellent bridge. This was a drop-in replacement on my Chibson Ace Frehley LP. The bridge that came with it was noisy. I use Guyker on most of my project builds. 10/10

I have several of these on Bigsby-equipped guitars including the Gretsch pictured. They fit fine and work fine. Dropped in with no mods. Note though that they can be a fraction taller than some tunomatics. The rollers have very little play and, while subjective, I haven't seen any loss in sustain after fitting them. The locking grub screws work well and hold everything solid. These are much cheaper than the "name brand" roller bridges. I'm sure they are made of inferior materials but then so were the bridges which came off and these are not professional level instruments. I'm happy!

The quality and value for the money is excellent. I am very happy with this replacement. Note the dimensions as not all posts, inserts, string spacing, etc. is the same on all TOM style bridges. Also make sure to set up with sufficient break angle over the bridge so as to avoid any rattling. I used this to replace a Gotoh that didn't have quite enough travel to intonate my low E string and this did the trick.

Was a direct install on my Grote LP. The intonation was already set on it, i just adjusted the D string up a little bit to match the positioning of my old bridge. I didnt bother putting in the part that goes into the guitar, just loosened the strings, put on the top part and it was a direct fit. So much better than the original bridge, and i dont know why this isnt always used. It should be the standard for tune o matic bridge guitars.

Ottimo prodotto sostituito il mio ponte con sellette normali e sorpresa sorpresa ottimo ponte.

Fit my Epiphone sg perfect. Easy to intonate guitar.

Merci , Excellent !

Solo hay que revisar el nivel de perforación. Ojo con eso

I liked that it inproved my tuning stability with no loss of tone and in fact an improved tone.