Knife Sharpening Belt Sander Electric Sander 1.2x15in Mini Electric Belt Grinder Variable Speed with 15PCS Abrasive Belt for Wood Metal Knife Leather

This little fella is pretty tough for the size. I've had a lot of luck and saved alot of time using it on my leather work.

The basic concept here isn't bad, but whoever designed this didn't think about a LOT of things they should have.To start, the belt doesn't run tight, and it's hard to get it to even run close. There are some springs, but they aren't very strong. You need to literally lever the top wheel up while tightening the wheel bracket down.The backing piece is wider than the belt. I'll probably modify this, if possible, but it means you have to be pretty careful when sharpening knives.The 2 wheels, (polishing and grinding), are pretty useless. The polishing wheel is to close to the unit to be useable, and the grinding wheel vibrates everything BADLY. I mounted the until, with rubber isolation pads, to a workbench. It rattles stuff off the entire bench with the grinding wheel attached.Oh yeah, I just found out it's nearly impossible to get belts for it, as they are 1.5" by 15", which even Amazon only sells from ONE seller, who ships them from China, which takes a month. And only offers a multipack with a ton of grits I don't need.I'd pass if I were you. It's kind of a bad product. I'm going to do my best to make it useful, but I wouldn't buy it again.

The media could not be loaded.  The good: Small, with enough power to sharpen a knife or sand small objects. Forward and reverse. Speed control. Very low power.The anoying: has a speed controlled soft start, that tends to lag more often than I like. Have to push on a allen head screw to change the belts. I put a knob on it for comfort and leverage. BIG BIG BIG issue: The belt pulley is crowned and allows fine adrasive belts and leather belts to track far to one side or the other if not track right off the machine. I had to remachine the pulley. If you do not have a macinists lathe tou are screwed. The spring is too tight. I will change it soon. No tracking control. The plate under the belt is wider than the 1" belt. Can't get small knifes to the heal without the handle bottoming out on the plate. I will cut the plate width, or remove and replace it with another plate. So it could be a better unit, but it's a great base for DIY enthusiasts

This is a great little sander. It is variable speed, takes readily available belts (including leather strop), and is reversible. I think this is a total deal for the money.

This sander is good for the money. The backing behind the belt is bigger than the belt makes it hard to get close to a handle of a knife. The belts that where suggested do not fit I bought both suggested sets and neither fit

None if the parts I’m supposed to put on match the (incredibly poor quality) pictures. Also seems to be bad translation. There are at least five parts that are not shown or mentioned. Seem like there was a change in production but no one told the manual making people.

The motor on this is too weak to work on anything other than balsa wood. This isn't a joke or an exaggeration. When I'm grinding wood, the belt slows all the way down to stopping if I press into the belt. The only other thing I could see this thing working for would be very small jewelry but strictly non ferrous metals. Trying to use this sander for any kind of material removal is just pointless.I would have returned this if I hadn't stupidly waited until after the return window to use it.

Vibrated so bad I couldn’t catch it to use it.

Bought this for my husband for Xmas and he loves it. Belts are easy to replace and easy to order. He had it set up and working in no time.

Muy practica

Lo ofrecen como que puede realizar trabajos de biselado y no cuenta con suficiente fuerza, no lo devolví por que me sirvió para afilar de ahí para allá nada sorprendido

Me hubiera gustado ir. Instructivo para utilizar los accesorios y como colocarlos y como afilar las cosas y para que sirve cada tipo de lija