TOPWAY 110V AC 16GPM Electric Self-priming Oil Transfer Pump Fuel Diesel Kerosene Biodiesel Pumps

Easy to plumb with npt threads. Once plumbed it self primed very quickly and hasn't missed a beat since. I would buy again. My only complaint was that the fan housing came with a dent but that was a quick fix.

This pump worked PERFECT for changing the oil in our boat! Way better than using the old manual pump! It came with an assortment of fittings too. My only problem was that I had to use a lot of pipe tape on the included in/out port fitting threads for the “Garden” hose style connectors to get them to grab. No leaks though in the end so I am very pleased with this pump! I chose the 110vac version instead of the 12vdc version just so I didn’t have to mess with hooking it up to the battery.

Why did you pick this product vs others?: cost and quality appeared to be good. after use 2nd time motor failed and just hums when turned on,

This pump does a great job. It emptied a 200 gallon tank of diesel in about 25 mins. The 1" pipe adapters that come with it will work with a garden hose, but you need to get an traditional o-ring the same size as the standard hose washer style seal to get it to seal well. The normal hose seal will leak. The depot stores sell the garden hose size o-rings. I am not recommending a garden hose, although it worked for my application. You will need a wire ribbed 1" hose on the pick-up side. I found a blue one here with the same threads that the pump uses. A non-ribbed pick-up hose will collapse on suction. My pump has a crack causing a small leak in the pump housing. It is not a big deal. I ordered a second pump just in case one pump fails. I can't risk having my fuel tank being stuck full in the back of my truck. Pros: Pumps very fast for the price. Cons: Really noisy.

I use for heating oil. It self primes at an 8 foot elevation difference. (Pump 8 feet above tank)

Worked great but only lasted through about 2.5 hours of use. Loved that it self primed but it quit running. I removed the cover to see if a wire had gotten disconnected and it did, because it was burned off of the switch.

Bought this for my shop. Used it to pump 55 gallons of hydraulic fluid from 5-gallon buckets sitting on the ground into a log truck loader reservoir that was 10 feet off the ground. Each bucket was emptied into the loader by this pump in about 45 seconds. The pump worked really well. I highly recommend it.

Fast... it does its job.

Bought this to build a transmission cooler flush machine. Ran it through a 10 micron canister filter and through the transmission cooler. Used Automatic transmission fluid with some transmission treatment fluid added. Probably a bit higher viscosity fluid that what it was meant for. Also used a 3/8" diameter hose so that restricted the volume quite a bit. Pump did it's job well. It got warm after about 30 mins Probably around 90 F - 100 F or so but nothing crazy. It was a bit loud but that may have been due to the fact that I wasn't using it for what it was meant to be use for. With a lower viscosity fluid and larger diameter lines it would most likely run quieter.

Great pump, does what advertised.

I needed a pump to transfer heating oil / diesel between tanks and this works very well. Most of the fuel transfer pumps available are 12V DC. I wanted a 120V AC plug in solution to transfer larger quantities of fuel. This transfers quickly