Westinghouse Outdoor Power Equipment WGen5300 Series Portable Generator Never-Flat Wheel and Handle Kit, Compatible with WGen5300DF and WGen5300DFc

Bought this for a Westinghouse WGen5300FDc generator. Wheels, handle, and feet fit perfectly and took about 5 minutes to install. Quality seems to be just fine, typical of what you would get on a portable generator. Package came with no directions but straight forward procedure. It would have been nice if the wheels would of have bearings but obviously not absolutely necessary. I would recommend the kit as these generators are heavy and it makes maneuverability very easy.

My new generator didn't come with a wheel kit. This is the one required to make it mobile. Frankly, it was too heavy to move by myself. Lots of generators come with wheel kits but this one required purchasing this add-on to get more mobility.It was easy enough to install and works as expected. Basic hand tools and a little thought is all it took because the instructions left a little to be desired. I improvised where the washers went as it wasn't 100% clear to me so I used my best judgement.

The wheel kit for the Westinghouse 3600 generator has been out of stock for 2+ years. The Westinghouse Outdoor Power Equipment WGen5300 Series Portable Generator Never-Flat Wheel kit fit the 3600 except for the pull handle so I cut the handle, removed a 2.5 inch section from the handle's middle and inserted a tightly fitting metal tube to span the seam where I'd removed the 2.5 inch section. The grip supplied with the handle is supposed to be slid from the end of the handle but I put it on a half of the handle prior to installing the inside metal tube. The grip was the hardest part even using alcohol as a lubricant (per wheel kit instructions) to move it around. The wheels and rubber support stops fit without modification. I recommend this kit for the 3600 generator as long as you're ok using a hack saw and can get a metal tube that fits inside the handle. I knocked a star off due to the mods I had to do. The components appear good. I'm very happy with the purchase.

This wheel kit for my generator was easily installed in a matter of minutes. You have to look up the directions for installation online (directions do not come with the wheel kit), but the directions were easily found and just as easy to follow. Once installed, the wheels and handle make the generator (which weighs over 100 pounds) easy to maneuver and move out of the garage and away from the house.

The wheels that came with this wheel kit do not have bearings in the centers as shown in the picture. They are simply molded plastic which I cannot believe will last at all rubbing against a steel axle pin every time they rotate. The set I got was missing parts as well. Unfortunately, in order to be sure it will work fit the Westinghouse generator, you're pretty well stuck with this crap. If the generator appears to be of the same quality, it's all going back.

This fit my generator just as described. Easy to attach.

Arrived in oversized box with parts bouncing around loose. Hardware (bolts for handle and pins to secure axels) was missing. All plastic wheels with no bearings as pictured in ad. Luckily, I had safety pins and M8x65 shoulder bolts to make it work. I gave three stars since the parts I wanted were present and in ok shape. (Axels and Handle)

Fit perfect on my new generator.