Question 1

Ad says 2s 7.4v, pictures show 3s 11.1v. Which is it?

Accepted Answer

OVONIC 3S 35C 11.1V 2200mAh Short LiPo Battery Pack With XT60 Plug For Airplane Helicopter (2 Packs) have correct.

Question 2

the battery i received weighs 140g....are you really claiming this battery is around 25% lighter than basically any other 2200 mah 3s out there?

Accepted Answer

My personal experience was that the
 3s 1300 mah and their 4s 2200 were the exact same size. And I left a sub par review because the battery didn’t perform anywhere close to others I have. I’ve noticed I can’t find their Ovonic 3s 1300 mah on Amazon anymore.

Question 3

what amp rate for Storage Charging is recommended for these?

Accepted Answer

For LiPo (Lithium Polymer) batteries, the recommended amp rate for storage charging typically falls in the range of 3-3.8 volts per cell (V/cell) at a temperature of around 20-25°C (68-77°F). Storage charging is done to prepare the battery for longer periods of inactivity, such as when you're not using your RC vehicle or drone for an extended period.

Here's a general guideline for storage charging LiPo batteries:

1. **LiPo Cell Voltage**: Before storage charging, ensure that the LiPo battery cells are around 3.7V per cell. If they are above this voltage (for example, after a flight or use), it's a good idea to discharge the battery to approximately 3.7V per cell before initiating the storage charge.

2. **Storage Charge Rate**: The recommended amp rate for storage charging is typically around 1C, where "C" represents the battery's capacity. For example, if you have a 2200mAh (milliampere-hour) battery, the storage charge rate would be around 2.2 amps (2200mAh * 1C).

3. **Charging Temperature**: Charging at room temperature (around 20-25°C or 68-77°F) is ideal for storage charging. Extreme temperatures, either too hot or too cold, can have negative effects on the battery's performance and lifespan.

4. **Balancing**: If your LiPo charger supports it, consider using the balance charging feature during storage charging. This helps ensure that the voltages of individual cells are consistent and reduces the risk of overcharging one cell while undercharging another.

5. **Supervision**: Always monitor the battery during the charging process. Do not leave the battery unattended while charging, especially when using higher amp rates.

Remember that these guidelines are general recommendations and might not apply to all situations or brands of LiPo batteries. Always consult the manufacturer's guidelines and instructions for specific charging and storage recommendations for your particular battery.

Question 4

Do you offer these batteries with the Deans T Plug?

Accepted Answer

These batteries only come with XT60, if you want deans just cut the connector off and solder a deans on.

Brand	OVONIC
Manufacturer	china
Model	O-35C-2200-3S1P-XT60-2P-Short-AU-G
Package Dimensions	11.3 x 7.11 x 5.59 cm; 139 g
Batteries	2 Lithium Polymer batteries required.
Item model number	O-35C-2200-3S1P-XT60-2P-Short-AU-G
Hardware Platform	android
Voltage	11.1 Volts
Power Source	battery powered
Batteries Included	No
Batteries Required	No
Battery Capacity	2200 Milliampere Hour (mAh)
Battery Power Rating	2200 Milliamp Hours
Material	lithium polymer
Manufacturer	china
Item Weight	139 g

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

O-35C-2200-3S1P-XT60-2P-Short

Details

Product is unavailable

Description

Specifications

Have a Question? See What Others Asked

Common Questions