Canpump CE 3650 GB: 3600 psi @ 4.4 US gpm, 1 in Shaft Pressure Washer Pump w/Gearbox

I have only used the pump for maybe 10 mins so far just to test it out and I’m very pleased at the moment. I have a gauge on it and it measured 3500psi while on the gun. With a pink tip it will easily reach 2 stories and about 50’ horizontal and that is being slightly under powered with about a 10.5hp engine that has had a long life on a log splitter. Once I get my gx390 Honda running I expect a slight increase in performance. I plan on doing house washing and surface cleaning with this setup mounted on my truck so I’ll update in about 6 monthsSo I did a job washing tractors and it went perfect but when I tried testing the downstream injector I found that it won’t draw and seem to very slowly be pushing out. I took it apart and it seemed clean. It has never had chemical ran through it. When testing I used water. Other than that the pump performs great. I have probably a couple hours of run time on it.

Well made pump with oil sight glass. The unloader when installed and tightened does not position the adjustment knob vertical (pointing up).Being vertical and out of the way was important to me because of the layout of the equipment on my trailer.I was able to go to my local hardware and get a hydraulic fitting that would allow me to be at "Tight" when I ended in any position with the tightening of the 2 treaded pieces in one coupler.Still give it 5 stars because it made me think out side the box and works great.Green Canpump is my new go to source for pressure washing pumps and I also see they have other products also.

I bought this pump last August and just used it for the first time today for about 2 hours and it’s seems to be loosing pump pressure but will. Build back up if I release the trigger ! Idk if maybe I just got a faulty pump or if it’s just temperamental! Talking with seller to hopefully get a new pump or refund .

I bought this pump as a replacement for the pump that failed on my pressure washer after many years of use. The pump mated with the 13HP Honda engine perfectly and all the water hose and pressure hose attachments were the same as my original pump so all the hoses attached without any problems. The only problem that I had was that the instructions supplied with the pump specified a 10W 30 or 15W 40 NON Detergent oil and I found that these types of oil are virtually non-existent. After consulting with the seller, I purchased a 30W Non Detergent oil sold by Lowes specifically for pressure washer pumps. The Honda engine started on the 2nd pull and I believe that this replacement pump has equal or perhaps superior performance to the original pump that came with the pressure washer. I couldn't be more pleased with the pumps performance, highly recommend it if you want to revive a tired old pressure washer capable of commercial, heavy duty service.

Pump arrived with a broken fitting on the unloader., tried to remove fitting and damaged what I thought was the fitting. fitting was made into the casting of the unloader valve. I damaged the unloader thinking that it just unscrewed had to buy a new unloader valve before using. because of wrench damage I did not try to return it

Easy to install

Works great

Fast shipping we used to struggle with having enough water off a 4200 4 gpm but this 6.5 5000psi is a beast water flow isn't an issues now love only regreat is I didn't do it earlier