Air Intake Hose Compatible with 2009 2010 2011 2012 2013 2014 2015 Hon-da Pilot V6 3.5L - Intake Filter Tube Replaces # 696-138 17228RN0A00 - Air Intake Duct Tube Boot

Had some doubts regarding some of the feedback. Turned out to be unfounded. Sturdy construction come with clamps. Use long screwdriver for the throttle body side.If you've never replaced one of these, it's can be a pain in the ___. I used silicone as the lubricant between throttle body, vent line, air box and the hose making it so much easier to install.In hindsight I would probably remove the vent hose clamp and use a hose clamp. Don't believe it, use the attached clamp. It's not the clamp! There is no place to position the clamp while trying to push the vent into the hose. I guess three hands would probably work.Overall it appears as well constructed as the Honda OEM, at 1/3 the price. Quoted $69.23 plus tax from dealer.

Worked perfectly.

Ten minutes and a couple tools is all it takes to install this perfect fitting part. No more cracked boot!

At first glance, coming out of the box this transition tube from the air filter box to the intake manifold looks very much like OEM. The quality feels very durable and the price was very hard not to pass up that’s why I bought it.Problem is the tube is about 1/2 inch to short and the mouth of the tube to the intake manifold was 1cm to small. The install was very difficult to get it attached. I had to force the intake side of the tube with an extreme amount of force and apply a little lube to get it to slid on.One of the emission pipes that fits into the rubber transition tube was off slightly and that’s where I feel like the tube needs to be a 1/2 inch longer like the OEM. Also, once I finally got it installed it was trying to pull off on the intake side and I had to really secure it in place before tightening up the filter box side.Overall, I was able to get it and it seems to be secured and working fine. So far no issues but we had to have it right away due to leaving on vacation and it was delivered same day as a prime member. Price/deliver/and fit (though a bit difficult) was right at the time.

Had this for a while now and thought I’d write a review since it’s been at work. Easy to install and it’s an exact replacement for the old one. The old one completely broke off at the hose clamp where it attaches to the intake manifold. Just switch over the hose clamps and it is literally a 10min install. Good quality at better price than the box stores!

Noticed the original intake had dry-rotted and split in several different places over the years and had no indication (performance or engine codes) it was bad until I needed to remove it for another repair. The replacement part seemed a little stiffer than the original, but it fit perfectly. It is a PIA to replace it. Got it overnight from Amazon and the cost was very reasonable given the complexity of the molding and fittings. It came with the clamps, which was good because you will probably destroy the small clamp when you remove the original part.

Great replacement/ you can feel the differenceOld 1 cracked in multiple areasEasy to install

Cheap and works great. My old one was ripped this replacement helped with gas mileage, performance.