NZXT H7 Flow - CM-H71FB-01 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Vertical GPU Mount - Integrated RGB Lighting - Black

Great case - airflow is good, but main highlight is that it looks amazing with the tempered glass. Plenty of room top mount a B650 Aorus elite AX, adjust cables and feed gpu cables. Word of warning: I easily got a nvidia 5080 into this case, but if you are using a 4080 ! or a 3rd party card (EVGA, GIGABTYE etc) find out its length from their manufacturers website before you buy this case. The 4080 is crazy long, and it may be very tight in this case. btw I dont think you need to buy any more fans for this, the 3 are fine imo. Recommended.

I bought this case to replace a Corsair Carbide 275R case with the other hardware remaining the same. The difference is amazing - under sustained full load (Cinebench multicore runs) I'm seeing 16C drop in CPU temperature although I did replace the CPU paste while I was moving the system across as well. It's such an easy case to build in, with plenty of space for radiators/AIOs, and lots of thought given to cable management, the finish is great with no sharp edges anywhere, and even after extended gaming sessions there is cold air coming from the top of the case, where previously the air was hot.

Lots of space inside for my components. Comes with easy cable management and extra parts. I have 3 SSD drives but only 2 can be attached to the back since my power cables aren't long enough to reach the third slot so I left it lying next to the PSU. Overall, a very nice case and highly recommend.

I upgraded from the H510 flow now that i have more space to accommodate a bigger case! Being able to have 6 x 140mm Noctua fan's and tons more space for airflow to get around my GPU and CPU is running quieter and cooler than before. Easy to work with cable management wise and being able to just pry the side panel's off without the hassle of screws is a big plus for me. Also just the added dust filter on the top from my previous case is a big step in the right direction from Nzxt.

First of all the description states "Vertical GPU Mount - Integrated RGB Lighting"... NZXT does not ship the H7 Flow with those, so unless Scan forgot to send some extra bundle, it's a mistake on the product page. It includes two plain black 120mm fans with nice long leads that are reasonably quiet at low speeds. They'd do in a pinch but four 140mm fans would be the ideal minimum for this case. The panels all take an unsettling amount force to snap off at first with their little rubber sockets. This might ease up over time, but it's not something to be doing often anyway. The metal feels a little flimsy compared to my old HAF-X, but once it's all closed the whole thing solid. The front panel can't be removed without removing the sides and top, so cleaning the filter might be annoying. The removable 3.5" drive bay in the bottom compartment might get in the way of power cables with longer PSUs and doesn't have any kind of anti vibration measures, but it's easy to take out with a single captive thumb screw. The power button / LED connector is a single piece so it's easy to connect to motherboard but you can't disconnect the LEDs without snipping a wire. The top USB A ports are very tight out of the box, and the internal USB C connector is weirdly shorter than the rest of the front IO, so didn't fit in the cable management channels neatly with my motherboard's header, but that's all hidden in the back and behind the vertical pillar thing in the middle. Cable management is pretty well thought out, there are channels with wide hooks to run cables down and plenty of cheap feeling velcro at various locations, plus plenty of cable tie anchor points (a little bag of cable ties is included.) The velcro can be a little fiddly in a couple of spots. There are no gromets but plenty of spaces for bringing cables to the front neatly.

Really nice to build in, plenty of cable space and nice velco straps for easy management.

This case does not come with ANY preinstalled ARGB fans!! I wanted that disclaimer at the top because my picture and the one in the advert is quite misleading. This case is fantastic though and well worth the price without ARGB fans. Everything is modular and most things are screwless to remove with the notable exception of the cable bar which has two screws you must loosen first. The case is very spacious and would likely fit an RTX 4090 and Noctua DH15 cooler or in other words the case is long and thick. There is space for a 360mm radiator on top and front although the top may have clearance issues with the motherboard if your rad is very thick and the front is quite space limited with where the cables come from so fitting a 360 might be tight. I fit a Arctic liquid freezer II 280 on the front no problem but it was too thick to fit on top with my motherboard placement. The fans that come with this case are actually very good for 3 pin fans and will work well out of the box but for better cooling performance I would recommend investing in some seperate fans, with RGB/ARGB if you prefer. Pictured is my final build with this case. I have removed the default case fans and installed 4x CoolerMaster Mobius 120P ARGB fans and an Arctic liquid freezer II 280 on the front. I really like the way the LEDs look in this case and it runs super quiet with great thermals.

Fantastic case, great airflow, lots of space to build in, easy cable management, everything can be accessed without removing screws. Best case I've owned