ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm +/- 0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Blue

Normally, I’m not a huge fan of silk filaments. They’re PLA, but they often don’t print the same as PLA. They can require temperature and retraction changes. This filament is wonderful though! It did require a bump to the printing temperature and I didn’t take the time to dial in retraction settings, so there’s some stringing and bumps in my photos that don’t affect my review. I have a new printer arriving in the next few days, so I’m not spending the effort to get this fully dialed in. I will absolutely be using this filament with my new printer and I’m excited to work with it there. The imperfections in the photos are due to my laziness, not anything wrong with the filament.The good: this stuff prints great. It adheres perfectly to the bed, and I have zero complaints with it. If you have trouble with underextrusion and brittle prints, you may need to increase the printing temperature. That’s a normal thing with silk filaments. The coloring is beautiful and looks amazing when you turn a print in your hands and see it go from green to blue. The photos genuinely don’t do it justice. The filament comes on a cardboard spool which helps reduce plastic waste on a hobby that’s already very heavy on plastic waste. Do the good you can where you can.There’s very little bad, but a couple things I want to mention that could detract from the filament. First, you need to dial in your settings. This is the same with every new filament type you use, so I’m not docking a star for it. If you just slap it on your spool holder and try to rock and roll with a 2 day giant vase print, you might have a bad time and be sad. That’s not the filament’s fault. Secondly, and I’m chalking this up to my printer’s stock Bowden tube, there’s a squeak sound occasionally. It’s feeding fine, just causing a squeak. It doesn’t bother me and doesn’t impact the quality of the prints, but is something to watch out for. I spoke with a friend that’s also used this filament and he did not have this squeak, but he also has a direct drive printer. Your mileage may vary here, and if you’ve replaced your Bowden tube with Capricorn or another premium PTFE, you probably will not hear it.In summary, I really like this filament and plan to try out other colors. If you want your prints to stand out and your favorite colors are shades of blue and green, this is a no-hesitation buy.

Not gonna lie this filament was amazing to work with. I was kind of worried it would not show the detail on my Gengar print but it looks Amazzzzing I can not tell you how many compliments I got on it. I looked great with all the prints but Gengar is my favorite out of all 3 so far. I have been wanting a fun purple for some time as that was one color I had not had yet so had to buy it and check it out. I think their tri colors would be fun to work with as well maybe in the near future I might have to try them out as well. To be honest the combination of the filament and the settings I did not have to hardly do any corrections or sanding before printing. I did not prime any of the prints just painted with acrylic and sealed it. I did not have any problems with the paint sticking to it. Now i hear in all of my support groups people have problems with filament sticking to the build plate. This was so NOT the case it stuck beautifully throughout all of the prints. the shine on this filament when you rotate the piece, let me say I love it and love how it faded from purple to black. I have a few more projects I defiantly want to use with this filament.

TLDR: Beautiful Dual-Color Silk PLA. The colors look great when printed in Vase mode. Resealable bag and cardboard spool with remaining filament length/weight gauges are nice touches. Zero issues with bed adhesion. Know your printer and its limitations; don’t skip calibrating/tuning.Two printers used for testing -- FLSun Super Racer delta and Fokoos Odin-5. E-Steps, Extrusion and PID tuning completed prior to testing; followed TeachingTech's calibration guide.All models sliced with Prusa 2.5.2 for FLSun and with Cura 2.5.1 for FokoosThe 1KG roll of dual-color silk filament was neatly wound on a ~140g cardboard spool, and packaged in a cardboard box with a resealable vacuum-sealed bag.The spool was embossed with the Eryone Logo, and a sticker provided gauges indicating approximate remaining filament length and weight gauge as well as filament recommended printing values.Temp Tower: 220 deg C provided a nice print; as the temp went down, the filament started to fall apart and I stopped the printDrippy Bucket with Divider Insert by DaveMoneySign on Printables- This is an easy albeit longer print ~8 hours for all pieces- Parts fit perfectly and allow for mix and match- Eryone White and Galaxy Silver also usedHollow Flying Ring by Grampa3DPrints on Printables- This is a fun toy, prints fast and is surprisingly durable- Eryone Galaxy Silver used for weighted ringHoneycomb vase parametric by Radus on Thingiverse- Low risk, high reward print; prints fast and looks great- 7 STLs of various sizes, and you can scaleUno Card Box by MrNiceDM on Thingiverse- Decent print with great color separation on each side of box- Used tree supports in Cura and it left some scarring/artifacts- Silk PLA is not as forgiving as regular or matte PLA; surface defects will be more pronounced"Issues" - the FLSun is a Bowden-style extruder with bi-metal heat break. This filament worked fine when in vase mode and when printing models without a lot of retractions. But technical, high-retraction prints like the Super Fine Lattice Easter Egg by Dazus on Thingiverse brought printing to a grinding halt with multiple extruder clogs. Know your printer and its limitations.Overall, great filament – nice colors and it prints nicely. You must calibrate your printer and test this filament to get the best out of it.

The media could not be loaded.  Me a encantado la mezcla de estos 2 colores y lo fácil que se imprime incluso a altas velocidades ya que esas 2 figuras están impresas a 160 mm/s y altura de capa de 0,16.Ya había probado algunos de doble color de otras marcas y este es el que mejor me a funcionado.Lo malo de estos colores es q no sabes como vas a quedar las mezclas por q a veces quedan mejor y otras veces peor pero eso ya es cuestión de pieza a imprimir nada que ver con el filamento.Filamento recomendable al 100% me gustaría probar todos los colores y sobre todo los nuevos que son de triple color que locura.

Es el color mas bonito que he tenido nunca, que maravilla, el rosa y el negro se funden y contrastan perfectamente. La impresión fue a 200 grados y el ajuste el típico que hago con esta marca que llegó a mi vida para quedarse, un lujo de colores.

El titulo del articulo esta bien por que pone 1 rollo de 1kg, pero en la imagen aparece un pack de cuatro rollos de 250g de diferentes colores. Al haber varios packs si no te fijas bien acabas comprando el rollo grande. En fin es un buen producto y no importa pero queria probar todos los colores para decidir cual comprar.

En el anuncio se muestran 4 colores diferentes, lo compré pensando que era un pack de 4 bobinas de 250gr cada una, pero sólo hay 1 bobina de 1kg rojo y negro, pero el anuncio tampoco da opción de cambiar o elegir otro color, cuidado al comprarlo, leer bien el título, sólo va el color rojo/negro x 1kg

El color es precioso, pero el rollo venía mal enrollado y me fastidio el final de una pieza de 5 horas…