Front& Rear Bumper Compatible with 07-18 Jeep Wrangler JK& Unlimited, Built-in 90W LED Light Bar w/ 2 60W Fog Light, Winch Plate and D-rings Rear Bumper w/ 2 LED & Hitch Receiver

Nice bumper, installed it myself , took about an hour and a half. Packaged well but did have a small dent on the bull bar. It was on the side that faces the radiator so you won’t see it unless you’re looking for it. Upgraded the bolts that attached the bull bar as I felt like the supplied bolts could be bigger. No big deal as I had bolts at home that did the trick. Looks great on the old TJ. Jury’s still out on mounting a winch as the metal is not quite as thick as the factory bumper. Would like to know if anyone has a winch installed and how it worked on the bumper. As far as impact goes even the factory bumper will bend if hit hard enough. Overall satisfied with my purchase.

Waited a year after purchase to write this review. I don't usually write reviews but I feel like I've given this product enough use to give it an honest review . It did not bolt right up onto my TJ , which was probably the only downside of this bumper. It 'almost' bolted right up, but one bracket was welded just slightly crooked and I had to widen the bolt holes on that bracket just a bit to compensate... Not a big deal... IF YOU HAVE A DREMEL OR DRILL WITH A DIAMOND OR CARBIDE BIT. It also only had a few bolts... For 6 bolt holes ? Anyway once it was mounted up properly it looks good. And it's sturdy . I have winched on it hard, countless times, with a 12000 pound winch, in deep snow, mud, at improper angles even. I was , unfortunately, in two medium level fender benders with this bumper on and both times the other car was damaged and the Jeep had almost no damage whatsoever . One bracket bent up slightly in the second collision but that's about it. I've rammed it against trees , just generally beat on it. Took it off a few months ago and sprayed or with some Rustoleum trim and bumper paint (it had some minor scratches) and it looked brand new again. If you can tinker with the install a bit this is a great value. They even shipped it to Alaska free. LEDS on it are worthless. My Badlands winch mounted right up so easy. My Warn 9500 did not fit, newer Warns probably will? Would buy again for sure. One thing worth mentioning is if you're running 35s the corners of the bumper get into the tire line just slightly and could rub when articulating fully.

Easy to install BUT!!! It says that you can use your original mounting equipment for your fog lights. This is not true with the one that I received. I had to get someone quarter inch by 1 inch bolts with lock nuts and if you are adding a winch, I would definitely recommend trying to mount it Before you mount the bumper, it will make it heavier for sure and take two people to lift it up into place, but the bumper leaves no direct access to the mounting holes for the winch. It is a pain in the butt doing so after the fact, other than that, the product seems very nice.

The package arrived undamaged. It was packed and wrapped with care. Installed on 2017 Wrangler JKU. There were no installation instructions however, it was still an easy install. Install time was about 2 hours with basic tools and you will probably need some assistance to mount it. I wired my LEDs to the reverse lights. You can easily tap into the driver's side tail light to get to the reverse light wire. You will need extra wire to run to the tail light. The black wire goes to the black wire and the red goes to white with the gray stripe. The LEDs give off a tremendous amount of light. I am extremely pleased with them. If you have issues, there are a few videos on YouTube for reference. The bumper has a textured semi shiny finish to it. It looks good. However, I knew I was going to be painting/color matching to my front bumper. I used Duplicolor Bed Armor spray. Ten coats gave it a matte black finish with a durable texture.

Love how great this makes my jeep look! The lights are super bright and it was easy to install. The light bar is an added benefit for seeing objects at night. Highly recommend!

I added this to the wife's 2017 JKU when she went to 35's. For the record her wheel and tire does weigh approximately 100lbs, definitely on the heavy side. Easy to install and looks great. This is what she wanted, something that swings out together with the door and didn't break the bank. I also added the in tire brake light ring and eliminated the 3rd brake light. We experienced the shaking and clunking that other reported. By design it seems to not be a tight snug fit against the door due to the top bushing that presses against the door always seemed to have a "gap" between the door. I spaced it further out with some additional washers. I also had to shorten the turnbuckle and push it in against the door to make it real snug. She still has some clunking but no more than expected. To make it quick and easy to disconnect and swing out to clean the door I used a small 3/8" (I think that's the size) hitch pin from an old garden cart instead of the provided bolt, and wired in a quick disconnect for the brake light. I didn't have a pic that has the hitch pin in it, the attached pic has the original bolt. In all, very pleased with the outcome and product. Is it the same as other $600+ bumper and tire carriers out there, no. Would I get it again, yes! The tire itself does wobble around on bumps, but remains secure. ****Update June 6, 2021**** Out on the trail, a few weeks back, a loud "clicking" sound developed when hitting bumps. Upon investigating, a 2 inch Crack developed on the piece that connects the tire to the carrier. It goes from the edge of the steel to the bolt hole. The clicking sound comes from the two pieces at the Crack rubbing when the tire shakes on bumps. It will only be a matter of time until there is complete failure. Will need to replace the entire bumper and carrier. I am not confident enough in the manufacturing of the steel and quality used. I have had to lower the rating to a 1