ANC7 ANC7B Earpads - defean Replacement Ear pad Cushion Cover Pillow Compatible with Audio-Technica ATH-ANC7 ATH-ANC7b Headphones, Softer Protein Leather, High-Density Noise Cancelling Foam

I bought these because they looked very similar to the ear pads that failed spectacularly on my 233621 H501 headphones. After careful measurement and a whole lot of eyeballing and gnashing of teeth, I went ahead and ordered them.They are a perfect fit.The process for replacement on the H501's is pretty straight forward. I'd expect the ANC7's to be similar.Pull off the old ear pads. Yup, just pull them off. They are held on with adhesive. It may take a bit of effort. If all the adhesive doesn't come off of the headphone, clean them up with tweezers or an exacto knife.There is a ring of memory foam around the ear hole of the old pad (mine was white). You'll want to cut that off with an exacto knife, preserving it as you go, as close to the pad as you can get. Pay attention to the positioning of the foam ring in relation to the old adhesive as you'll want to duplicate that on the new pads.Then take the tape backing off of the new ear pad and carefully stick the memory foam ring so that it only covers the inner half of the ear pad adhesive. Then carefully place it in the headphone and press together, working your way around, seating the new ear pad with your thumbnail.Then do the other side.The H501 earpieces rotate 90 degrees to lay flat and come with a hard shell case. I put them into the case and zipped it up for a while to help the new adhesive set.The new pads are not quite as thick or as buttery as the original but they still feel great.

They came quickly, fit our headset and are very comfortable. Recommend.

These work well and are easy to install. However, they have just a little less foam. Still, a very good option.

I’ve replaced these cups several times over the years because the foam starts to come out where it attached to the headset. Overall for the price it’s a good replacement.

Good product, matches original and they are easy to install.

Pros: Look like OEM pads. Comfortable. Easy to install. Cons: occasionally slip off center and need to be recentered, though this only takes a few seconds.

Very happy to replace my flaking earpads rather than my still (excellent) set of headphones. To install, just pull hard on the old earpads and they come off. Set these in place thereafter. Magic. Should've done this a few years ago!

I thought 7b was a placeholder for 7? Series……not the case. Theses are too small both length & width.

Given the age of my Audio Technica headphones I was surprised these were available. I think they are at least twenty years old. Old pads which had split exposing foam, came off easily and the new ones fitted exactly.The are as comfortable as the old pads so well pleased.

ATH-ANC7Ｂに取り付けた問題なく取り付けることは出来たが一点だけ違う購入したパッドには 黄色いスポンジが付いていない取り外した純正品にはスポンジがついているが これにはない純正品から取り外して移植したがその点だけ残念だ後は問題なく使用できる

Get brainwaves ear pads. They stretch and fit perfect. Don't waste money on these. Double sided tape fails over time.