Portkeys LH5P II 5.5" 2000nit Camera Field Monitor Metal Frame Camera Control for FX3/FX30/A7RIV/A7MIV/A6300/A6400/RX100/RX02/A7CII/ZV-E10, GH6/BS1H/BGH1, C70/200/300/700/R5/6/7/8, Z8/9, ZCAM E2, etc

Some other models claim to have BT control of BMPCCs but in fact do not. This model was one of a few suggested by Portkeys support for my use case and does indeed work for this application. Compared to a BM5 III (not compatible with BMPCCs), the back shell of the LH5P II is lighter and more compact, lacking the heat dissipation fins and feeling more like plastic at first, but it's definitely metal. It accepts one FP-N battery and can be powered externally with the included D-tap cable, but external power will not charge the battery. In this case the battery serves only as a backup, e.g., when switching D-tap batteries the monitor will continue to operate without external power connected. A shame they couldn't add charging. There is one ¼"20 thread for mounting, but the display can be flipped in software so this mounting point can be anywhere with a magic arm. The physical buttons (normally on top) will move if flipped, and since the markings are not on the face of the monitor, it can be easy to hit the wrong one. I ended up sticking labels on the bezel on front of the screen. F1-4 can be programmed for most in-monitor features (of debatable usefulness for BMPCCs where in-camera peaking, false colour etc are more accurate) but also supports camera REC, giving a physical button accessible to the operator and a must for shoulder rigs. I mostly use this and Rectangle Crop to check focus. You can change the following BMPCC settings via the touch screen: •Codec/Resolution •Framerate •Shutter •Iris •ISO •WB •Tint •Start/Stop Record •Spot AF (with compatible lens) •Manual Focus (with compatible lens) •Manual Zoom (with compatible lens) •Auto Exposure You cannot change the ND filters. You can enter, navigate and exit playback mode, and see the camera's battery level alongside the monitor's. Red outlines appear when the camera is recording, although these seem less than reliable and often show recording when the camera is stopped, but I haven't noticed them showing not recording when the camera is speeding, so that's good. If using BT control, you sometimes have to fight with the monitor's OSD to get access to the camera controls instead. Some combination of taps and swipes usually works although I haven't figured out a reliable way to get what I want. Brightness is decent, not quite hitting the highs or lows of the BMPCC 6K Pro but certainly offering enough for most conditions. It is adjustable via the touchscreen. There is a built-in fan which can be controlled by the touch screen, although it remains to be seen if it will automatically ramp up if it is overheating. It features HDMI in and out so easy to link to a director monitor, and also a 3.5mm headphone jack with a separate volume control on the touch screen. Useful if you're taking audio from the camera's jack but also want to monitor at a decent level. It's a shame this is similar in price to the BM5 III which benefits from SDI in and out - to get SDI WITH BT control of BMPCCs requires spending over 2x the money. It's cheaper to just get a decimator if you need SDI. Overall, I think this is an essential bit of kit for anyone building a shoulder rig with BlackMagic Pocket Cinema Cameras, offering almost every control needed from a different position. If it had SDI it would be a steal, but lacking that it seems respectably priced.

I waited a little while before writing this review to make sure the monitor lived up to the other reviews, and I’m happy to say that it absolutely does. I did have one small issue initially, so I contacted Portkeys customer service through Amazon. I spoke with Lynn from the Portkeys Amazon Team, who was incredibly helpful. She liaised with the technical department on my behalf and helped resolve the issue quickly and easily. It’s a fantastic monitor, and the after-sales support has been just as impressive. Five stars for both the product and the customer service. Highly recommended.

Overall a very good HD monitor. Works great with the Sony Fx3 fully controlled from the monitor if you need and it’s quick too. Only downside is the power dc5pin7-24v cable that comes with it, it just doesn’t lock in tbh the smallest of touch finds the cable dropping out which is really annoying. Going to find an alternative maybe Alvins cables to see if this is a cable issue or the connection in the monitor itself . Hope it’s the cable 🤞

Very good monitor with features not replicated on other similar monitors, ie peaking area options. Portkeys customer support were excellent assisting my self to address some monitor/camera firmware issues. If you value good customer support ,Portkeys is your place to go

Throughly impressed with this monitor. It's very easy to use, light weight and great value for money.

Item arrived as described and worked straight out of the box. I came well packaged with all accessories as described. Although early days yet, I am well pleased with this monitor, time will tell how it holds up.

Great monitor for a camera. I gave it 4 stars only because the camera controls are not fully functional. I hope this will be fixed in future firmware. But overall everything is good.

After previously being sent a faulty item (a warehouse mistake from Amazon sending a returned item out 'as new'), which I gave a bad review for here. Portkeys replaced the monitor and reimbursed the shipping costs involved. At times it was challenging due an overseas postage complication but Portkeys maintained customer service throughout and I am happy with the result. Thank you for fixing the problem. Recommend.