iFi ZEN CAN Balanced Desktop Headphone Amp and Preamp with 4.4mm Outputs (UK PIN)

I needed a dedicated headphone amp as I purchased a pair of high ohm Beyers and my audio interface was not giving me enough volume. So after much research, I discovered this unit. At first I was skeptical as it is a ChiFi and there were some people complaining about faulty units with noise issues so I thought I could give it a try and if anything I can send it back if something is wrong. I must say that I am happy with my unit. I bought it directly from ifi (fulfilled by amazon) and it arrived in perfect condition. It has 4 gain stages, perfect for handling anything, especially my high ohm Beyers, it has balanced output if you like that and a great analog circuit for adding bass or expanding the stereo image or both at the same time, I hardly use this feature but it may be an advantage for some people. At $ 149 it is not a cheap product, however it is considered an entry level amp that I think everyone can like. Please note this is not a DAC, it is just a headphone amp, so you need a proper audio input (RCA, 3.5mm or 4.4mm balanced).

After about a month of use, the ZEN CAN performance is exceed my expectation. Slightly bass boost and roll of high and still very details, a typical iFi sound signature. TLDR: very pleasant/enjoyment listening time. There are plenty of power to drive the most headphone on the market. The gain goes up by every 6db with 4 gain levels goes from 0 to 18. Most of my headphones have Impedance of 30 - 250 Ohm with Sound pressure level of 95 ~ 120 dB and can get plenty loud at only at +6db gain. The CAN also does not distorted my IEMS. Buttery smooth volume knob combined the entire case made out of metals do scream quality, except the rattling button make it feel cheap. Speaking of which my other complain about this button is that I have to press it in hard and hold it for half of a second for the CAN to turn on, not sure if this is a feature? The manufacture claim to use tech from higher end flagship product line which have some class A parts, this causing the unit to run very warm after a minutes or two and stay at high temperature until the power is off. There is no auto on/off and power saving mode that I know of. This will become a routine to manually turn the ZEN CAN on and off every time it needed.

In early July I got the iFi Zen DAC v2 along with Beyerdynamic DT-770 (250 ohm) headphones as my first headphone kit to begin to get back into serious music appreciation. While the Zen DAC could drive the headphones, you could tell that it was taxing the integrated amplifier circuit a bit to push them to moderate volume levels. The sounds was good, but it just didn't seem to reach the potential, and I hoped adding the iFi Zen CAN would be the solution, and I wasn't wrong. I received the Zen CAN early in August, along with an upgraded iFi 5v power supply and 4.4mm balanced interconnect cable to make sure I got the most out of it. Once it was set up, I tried the 4 different gain options, and while the 12db setting worked fine, I set it to 18db where the volume knob sits between 9:00 and 10:00 for "normal" listening levels. It has plenty of headroom at this setting and that's what one of the things I prefer in audio gear, headroom. As for the sound difference between the integrated amp in the DAC vs. the CAN, I wouldn't say it's night and day. There is a significant difference, especially with more power hungry headphones, and I could tell that the extra power opened up the sound to reach the potential on the DT-770s. To me, the CAN sounds just a bit on the "warm" side, which for the DT-770s is perfect since they tend to be "bright" and analytical. I can't really speak to the detail or sound stage since I don't (yet) have anything to compare and contrast, but I can say that the listening experience is very enjoyable. For me and my (first) setup, the iFi Zen Can is the perfect complement with the iFi Zen DAC v2 and the DT-770 headphones.

Great little amp for planar headphones. Using it with the Zen DAC as a stack to power my DCA Aeons and couldn't be happier with the results. The design is sturdy, compact and clean, perfect for a desk setup. Using it on the second lowest gain seeing turning the knob to 12 o'clock is VERY loud, louder than comfortable listening levels for me anyway. The bass boost is subtle, but adds just enough to not be distracting. 3D is interesting, makes the soundstage more pronounced in the center image, things seem further in front and in the back of that makes sense. Honestly, I just keep both turned on unless I'm gaming. A great product for a good price.

I don't know what XBass/3D does, I just know it does fun things to music and headphones. And then when you turn them off, you have an amp that is as transparent and neutral as it needs to be. Lots of gain increments are useful (just be wary of the knob position as you must go up to go down). I would definitely use this set up with TrueBass + Xbass + 3D whatever it's called to convert people wearing muddy garbage bass boosted headphones. This is what those people actually want, but have never heard. Why iFi insists on knee-capping their products performance so they can upsell snake oil power supplies is both a mystery and not a mystery at all to me. Just. Don't. Buy. Them. DONT BUY THE POWER SUPPLIES! iFi have a great sound, and the Zen Dac and Can have a cool retro look, but the Zen Dac includes NO power supply at all, and the Can includes a 2.4 amp one? Digging into a manual/"low-down" I found on iFi's website, I found this interesting bit of information. "It’s worth knowing that the ZEN CAN appreciates more than 2.5A, and can handle up to 4A peaks." So...why not include a 5v4a power supply? Why is your **$70** "SilentPower" adapter only 2.5A? I bought a UL listed 5v4a power supply for 14 dollars on this site. It works great. Just do that. With good power provided this should drive anything loud enough to damage your hearing. If you have to ask if it has enough power, it does.

I went Zen and never looked back, the dac v2 was so good but the amp is extra special, you have more control but the xspace or 3D effect made my hifiman edition xs sound like 2000 dollar headphones... Just as good as it can get for sound.. The combo is perfect and the amp adds another 60% to fullness... Get the combo if you love bass, clean sound and wide soundstage And the amp comes with ifi power brick.. Just perfect

Even though the iFi ZEN CAN is supposed to be a budget Desktop Headphone Amp and Preamp, the sound quality and its features can only be found on much more expensive gear. First, I bought the iFi ZEN DAC V2 and I was so pleasantly surprised and happy with its performance, that I ordered the CAN right the next day and...WOW what a pair they make

I consider myself a borderline audiophile. I appreciate a good product and like a nice sound. I don’t subscribe to buying overpriced cables that supposedly make my system sound better, instead looking for an understated, good value alternative. So I started my journey with ifi when I bought a hipdac2. I’d been a bit disappointed with my headphone experience and I was blown away by what a decent headphone amp could do. My home hifi amp doesn’t have a headphone socket (more audiophile nonsense) so I’d had to buy a headphone amp and despite it being from the manufacturer of the amp it was seriously disappointing. Having been so pleased with the hipdac2 I thought I’d try the ifi zen can. Well, it didn’t disappoint. My big headphone found a new lease of life. They’ve never sounded quite so good. The only fly in the ointment, and I’d like to think is a one off, my zen can didn’t come with a power supply, despite being listed with one. In all fairness the seller stepped up and having first got in touch with ifi then sent one out, although it did take a week to arrive which took the edge off the joy of a shiny new toy a little.

El sonido suena más potente, mejora los impactos repentinos en la música, por ejemplo en la batería. Todas las frecuencias mejoran un poco pero no hace maravillas. El modo Xbass no ayuda tanto la resonancia de los bajos como se esperaría. Honestamente no vale lo que cuesta, yo buscaría un amplificador Yamaha el cual incluye DAC y un buen ecualizador.

Pretty good for the price, has enough power for my headphones and has balanced input/output. I don't think the xbass is very good, but my headphones aren't super bassy, and I prefer to eq anyway.