FIDECO Hard Drive Docking Station, USB 3.2 Gen 1 Hard Drive Reader for 2.5 and 3.5 inch SATA HDD SSD, Dual Bay Hard Drive Dock with Type C Port, Support Offline Clone

I bought this to use as a multi-SSD holder, so can't comment on its cloning capability; but as a multi-drive station it works just fine. The first thing you notice is that it's quite big, but it's mostly plastic so it doesn't weigh a lot - which could be an issue if you're putting a chunky 3.5-inch drive in it, especially on only one side. It's also, I suspect, designed for gamers, so the 3 lights - power (red), left and right (blue) - have a slightly "evil" look to them, but otherwise they work as you would expect. I'm running it on a Linux system, and it has no problem mounting the drives, whether you have 2 inserted or just one on either the left or right. 2.5-inch SSD disks slot in and 'bed' very naturally, without having to search for the entry point, and the whole process feels very reassuring. Another nice feature is that the station as a whole has its own 'on/off' switch. Copy speeds from the outside seem to run at about 110-120 megabtyes/sec on the USB A port for a 250Gb test copy, which is slightly faster than my old external hard disks, but definitely slower than the ports are capable of. Happily, it's fast enough for me, but gamers might want to test for themselves. One oddity is that, once mounted, a "pair" of drives seems to work together. If you try to unmount one of them using the "Safely Remove Drive" option, you get a warning message saying "Unable to stop drive" even though the drive disappears from your desktop. When you do the same thing to the remaining drive, it also disappears, and you get *two* system beeps to indicate that it has successfully dismounted both drives. I would definitely advise doing this before turning the unit off if you don't plan to use it. So: a decent 2-drive disk station for less than 30 quid. I've only owned it for 48 hours, but so far so good. And this is the 2nd Fideco product I've bought that seems to do its job. I'll be keeping an eye out for them.

Works great if you have the correct port on pc.

The dual hdd Dock worked well for 3.5" hdd's allowing them both to run at full speed, not the case with ssd's tho. The connectivity was fine although the 2 supplied USB cables were a little short. The build quality was ok altho made out of plastic. It did allow the vibration of my hdd's to pass through to the desk, causing quite a bit of noise, so some extra sound dampening probably required.

My G-RAID enclosure packed it in, so I grabbed this SATA dock as a quick replacement. Set up two 4TB drives in RAID 0 using Mac Disk Utility (Jade Zero), no issues at all – works seamlessly as an 8TB backup drive. No major complaints. It does get warm since there’s no fan, so I wouldn’t recommend leaving it plugged in and spinning 24/7. I use it when needed, then power it down – keeps the heat in check. Build quality isn’t premium, but it’s sturdy enough and sits nicely on the desk. LEDs are clear and easy to see. USB-C connection is solid. Power switch is on the back and easy to reach. Ideal for quick access or general backups. Not something I’d run all day, every day, but for my use case it’s perfect. Would happily recommend.

Did the job.

This item comes with all the cables that you will need to get going and its just slightly larger than 2 HDDs. so it can be placed on your desk close to hand so I get 2 extra HDDs added to my PC and no screwdriver to mess about with. you can easily clone disk to disk with the press of a button (Both Disks must be the same capacity) and it will do this even if it's not connected to a PC or the PC is turned off. So it's easy to set up simple to use and value for money you should take a look at this dock I would happily recommend it

Great value for a USB3.2 HDD reader. I've only had it for a short while but so far it seems much faster than my previous docking station (USB 3.0). Please bear in mind that you need to have USB 3.2 architecture in the PC to take advantage of this USB 3.2 device. Basically, it will work at the speed of the slowest component, so the dock, cable and port all need to be USB 3.2 capable.

I try this product and looks working. I suppose the problem that is not universal accepted. I used with my Windows laptop and eve the hard drive spinning and all connection are good, it does not see inside my drivers. So I detect the HD BAY In the system but the docking bay did not make the drivers available to me. I suppose is only matters of firmware or drivers. I update the drivers same story... I returned the item to the seller, maybe in the future I will try again if they upgrade it.

O produto atendeu todas as expectativas. Os cabos são robustos e a velocidade de transferência é constante e estável. Ponto negativo para os responsáveis que violaram a embalagem do produto com estilete, o saco plástico chegou violado e a caixa do produto cortada. Outro ponto negativo para a transportadora no Brasil, já entregaram o produto mas aqui ainda consta que "concluiu o desembaraço aduaneiro", por muito pouco não me pegavam em casa.

Funciona perfectamente con Windows 10/11.

جيد لكن حينما وضعت فيه عدد اتنين هارد اوقف الجهاز كله بلا مبرر

excellent produit qui m'a permis de libérer un port USB 3.2 grâce à sa connectique USB - C; les résultats sont là avec des disques durs SATA qui tournent à pleine vitesse, pouvoir en mettre 2 simultanément est un vrai plus

Práctico y sencillo de utilizar, además de corresponder con lo publicado. Aspecto a mejorar: Para disminuir riesgos para la clonación sin conexión a PC, es muy recomendable que cuente con rótulos más explícitos de identificación de las ranuras "Source" y "Target", preferentemente rótulos fácilmente visibles que las identifique.