Topfit Tesla Model Y Mud Flaps, Car Mud Guards Defender Wheel Tire Mud Flaps Splash Guard for Model Y Accessories 2022 2023(Set of 4)

First of all I want to start off with the Product is a solid product. However, We had some handling issues that resulted in receiving defective products. The seller [RUNMIND] not only sent a cheaper knock off version that was different the photo of the ad, they were only willing to refund $20. At that point this was going to be a 1 star review.However, after repurchasing this product from a better seller [SUMK] I reassessed that this is overall this is a fantastic product:Pros:- Well made with HQ materials- Looks 100x better than the rubber pedals at a fraction of the price from Tesla- Installation is incredibly easy. The rubber on the back of the pedal is softer than the knock offs as to make it easier to install. I was able to get mine on within 10 min with nothing but my bare hands.Cons:- The finish shine of the aluminum is not the same as the ones from TeslaNet, I would highly recommend this product if you buy from the right seller. Do not skimp on the $10 and buy from RUNMIND seller. It is not worth the hassle and based on the Quality of item I received most people will end up regretting that purchase.

So based on the reviews about how hard these are to install, I put it off for a week or so until I had an afternoon to make it happen. I took them out of the packaging and left them in the sun for an hour until they were nice and hot. I pulled the car out of the garage ( or rather the car pulled itself out of the garage (GOTTA love Teslas...)) and removed the brake pedal pad. I decide to start with that one since everyone said that one was easy. True to the remarks, it went on with just my fingers. I then prepared myself and my psyche to expect a challenge on installing the accelerator pedal. To my absolute surprise and delight it,too went on with just my fingers!They both fit nice and snug, look awesome and were simple to install. It literally took less than 5 minutes to install these. The trick is to let them soak up a lot of sun so that they are nice and pliable before attempting to install.Great product. Highly recommend!2 MONTH UPDATE: So it has been 2 months and these pedals are holding up nicely! No signs of wear and ZERO problems. I would definitely buy them again.

These were an EXTREMELY tight fit. Took me over an hour to install. Sharp look and good feel afterwards. Expect worn fingers ... maybe blisters ... but worth it!

These went on fairly easily, and made a massive improvement in visual appeal. I didn't drive the car immediately after installing these, and they felt so natural on the first drive that I had totally forgotten that I had put them in. Upon closer attention, the go pedal definitely feels more substantial.These arrived in a much more compact package than I expected, really no frills in the packaging. However, reading the reviews, you will have all the info you need to install these.My process took less than 15 min, including the time to fill a bucket part way with hot water and walk down to the garage.1. Fill bucket with enough hot water to submerge pedals.2. Place each pedal into its own ziploc bag. Leave the top of the bag open, and submerge the bag slowly until the water starts to get close to the top, then seal the bag. This allows the bag to stay submerged in the hot water to warm the rubber, and keeps the pedal dry for when you want to put it on.3. Remove the existing brake pedal cover. Remove the new brake pedal cover from the bag/water and place one "vertical" side over the brake pedal. Make sure both corners inside the new pedal cover are over the edges of the brake pedal, then slowly "peel" the inside lip of the pedal cover over the edge of the brake pedal.4. Repeat the process for the go pedal. This pedal does not need to be removed first, but the positioning makes it a bit more awkward. I started with the bottom left and worked my way around. Finger strength definitely is a plus here.

Great upgrade to the pedals. They really look nicer and feel good on my feet. The black strips are raised rubber and grip well. I watched the quick install video from this listing and pretty much did that. They don’t show removing the existing brake pedal cover, but you just bend the rubber on the back and it slips right off. I did the accelerator pedal twice because I could feel the upper right corner wasn’t over the medal. On the second try I slipped it over the right side, bent back the upper and lower corners with my two index fingers and bent back the middle with three other fingers and slipped it right on. My fingers are slightly sore after that but total install time for both was about 10 min. If I did it on another car I’d expect to be under 5. It’s one of those things that are a little tedious the first time and easy the second after you have experience. One other tip, you can use the selfie camera on your phone to take pictures of the back (or just look at the screen in good light) to see that the rubber is fully wrapped, but it’s also easy to feel when it’s right.

These are great, and fit the pedals well. They are a little difficult to attach to the actual pedal structure, but I surmise that’s a good thing! After all... if they are hard to get on, they are probably hard to get off, and will stay put. That would seem to be important for brake and acceleration pedals. You kind of have to “work them” onto the pedal, as there is a “lip” on the backside that runs all the way around the structure. All in all, it took me maybe 15 minutes of using 4 letter words to get them installed. I would totally do it again, and recommend these!

Putting on the brake pedal was quite easy and done within a few minutes. The acceleration pedal took me about 15 minutes as it really needs to flex. Some recommended using a heat gun but I didn't use one. I slid the pedal and push until the corners are all the way end. Start with each either the right top or bottom corner and work your way around. Then I flex the other sides to get it inserted. It got my fingers blistered because of the tight fit but after several tries it finally was able to have in place. The rubber grip works and matte stainless steel looks great.

Great product, slightly hard to put on and once it was in - it looks great in my Tesla

Great product, put the brake in hot water before installing will make the rubber soft and much easier to install!

Good value for money

Product seems to be durable. It took me 5 min to install both pedals.

Fix good