5/8-Inch U-Hook PEX PEX-AL-PEX(1/2" PVC) Talon Clamps Pipe Support 20mm-22mm O.D Plastic Socket To Fix Corresponding Pipes 10-Pack

TV trays

The product is fine, but the current description is confusing. Although the description says 5/8 inch, the inside diameter of this is sligtly larger than 3/4 inch (20mm). If you want a snug fit over a tube that is 5/8 inch or 16mm outside diameter, this is too large. I am returning this and will try the one they claim is for 1/2 inch pipe.

These turned out to be perfect for our needs. My wife is disabled and on oxygen. The concentrator is located in the living room to cut down on the noise and we have 50' of not too beautiful green hose running the length of the house to her bedroom. I originally hung it up with plastic snap holders which were glued to the wall to keep it off of the floor. It looked pretty funky, but it was functional. Changing the hose, however, was a real problem. The snaps were hard to open and often came off of the wall, leaving a dime sized unpainted scar. I got the idea to install a run of 1/2" pvc pipe, leaving 6" between the 5' sections. This allows us to thread the oxygen tube through the .pipe sections easily. The pipe hangers worked perfectly. They are secure, easy to screw to the wall (use a #6x1-1/2 wood screw so that the heads seat into the fastener recess), and hold the pipe approx. 1/4" away from the wall so that dust doesn't accumulate on top of it. It's a neat installation and we can change oxygen tubes in 10 or 15 minutes instead of an hour. I hope that nobody ever needs these for the same reason, but if you do this has proven to be one of my better ideas!

These clips were exactly how they were advertised. I measured my old broken one, and compared those measurements with the site. PERFECT fit. I used these clips to replace the OLD ones on a foldable table I received from my 92 year mother. Without a doubt, I highly recommend this product, but be sure to measure the old ones first!

No exact fit but did the trick. Used for TV trays.

I had some older TV trays with metal tubular legs with several clips that were broken. I really like those trays and they don’t make that style at anywhere near the quality anymore. At least as far as I’ve been able to determine. They also stopped making replacement clips for them years ago. I thought I’d try this type of clip as they’re pretty similar to the originals. Tried a 1/2” variety which turned out to be too small. This 5/8” one worked like a dream.

They did the trick but to big for my project but did nothing Jane the tome to order smaller ones.

I used these to replace the broken frame holders on my TV snack tables. These are PVC material which actually holds the table together more securely.

This is great for mount 1/2 pvc pipe pixels lights.