PAMASE4Pcs RV Water Heater Anode Rod and Flush Wand Set- 9.25"L x 3/4" NPT Thread Magnesium Rod for Suburban and Mor-Flo, Camper Hot Water Tank Element Parts & Cleaning Rinser & Seal Tape…

The sprayer worked great. It flushed a lot of rust from the hot water heater. Great value. Definitely recommend it.

I use this to flush out the hot water tank on my RV. Typically, once in the fall for winterization and again in the spring when getting ready for the camping season. It's easy to use and works well. It's nice that it comes with 3 anode rods so that when I remove one to winterize I have the other already on hand when gearing back up in the spring. A good quality product overall.

The socket fits, but only has a small hole to turn it. I wasn't able to get enough leverage to remove the old anode, so I had to go out and buy another 1.25" socket to use with a long breaker bar to get the corroded anode off the water heater. Once that was done, installation was easy.The included sprayer fits perfectly through the anode hole, and I was able to spray out LOTS of the residue. The button on the sprayer did feel a little flimsy.Included teflon tape was a nice touch, and the new anode fit perfectly. I wasn't able to find a specification, but since I had my torque wrench handy I just used the lightest setting (maybe 10 ft-lbs?) and everything fit nicely.

Only thing I did not like is the wrench unit does not have a way to support and apply pressure to the rod as it is out into the unit. The access area is very small and crapped.

Purchased a used trailer and needed to replace the anode rod in the water heater. This kit was the ideal solution...the tool to clean the tank out worked well, the replacement anode was an exact replacement for the one in my Suburban water heater and the included wrench made the job easy.Only minor grip - the cleaning wand did leak a bit where it screws together. Not a biggee since you are going to get wet doing this any way you look at it. Just remember to release the pressure in the water tank before you remove the old anode...don't ask me how I know this.One issue I had was getting the old anode rod out...the previous owner had never changed it and the camper was about 5 years old. I used a large screwdriver to give a little more leverage (the wrench included in this kit was easily up to the task) and pre-treated the fitting with some "Tri-Flow" penetrating oil.

We purchased this to clean out the water tank in our RV. Once we used it, we realized it can be used for many different jobs. It has a great high pressure spray and can go down to low pressure.

Fit perfect, no leaks!

Works well but you need to be very careful of how much you adjust nozzle or it will come off inside your hot water tank like mine did, thankfully I was able to get it out others may not be as lucky

As advertised - a really good kit

Mon campeur