Transformer 120V -> 24V 60HZ - 0130M00140S

Exact replacement

It fixed my furnace problem!

Matches Bolt holes . Correct fit, form, function, as the old one. Had to change terminal ends on the 110 v side to match existing wiring. Easy.

You need a little electrical knowledge to trouble shoot a bad transformer. I was testing my A/C unit for the upcoming cooling season and heard something funny pop when I went from heat to cooling. I then attempted to turn on the fan only, it's normally on automatic, and nothing. I checked the out door unit for power and that was fine. I took a screw driver and pressed in on the contactor and the unit started fine. That is how I tracked it down to the low voltage electrical side. I took my tester and had power in but nothing out to the system. Probably saved myself $300 to $400 by spending $20 and 15 minutes of my time. Bought myself a new putter with all that cash saved!!

I should have read the reviews first I guess.This transformer came with a wired primary side, not tabs as pictured/described.The only reason I purchased this in the first place was because it was supposed to be a direct replacement for my existing transformer.Lots of other, cheaper, options with wired connections, so I am returning it.Amazon is getting worse every day at keeping descriptions correct :(

At first I was afraid that I would have to return the item due to the fact that it did not have four leads to connect my input and output wires to (which the picture shows). I received a similar part but the Vin and Ground were already wired with a female connector instead of male. I just snipped them off and spliced together what I needed and all has worked perfectly!

Well built for the price. Using in shop furnace.

This item is not the same as the picture. It comes with two load spades, but two wires with female clips for the 110 and neutral. In doing so, one needs to either clip the furnace or product wires and change the spades to male, splice, or twist. I used two male to male adapter spades. Seemed to work fine after. Also, it shipped in a bag... not a box. When the product reached my house, it was hammered dog spit. The mount was bent to the frame and the two spaces were bent 90. Had to bend back as best I could with pliers. Decent product with some assembly required.... would buy again, but would hope to find one that matches the picture instead.