User Tips: Do not use a heat gun or torch to speedily cure the resin, It will damage the molds. Just let it sit 5-10 minutes, after stirring the epoxy resin to reduce the bubbles. You can use a mold release spray and let it dry in the mold. If you don't have, you may need a baby wipe or a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom. Please make sure your resin piece is fully cured when you decide to de-mold. Usage: 1.Pour the resin in to a measuring cup and stir slowly to release air bubbles. 2.Pour into the mold and stir slowly. Can stand for 24 hours and take out. 3.For the kids, Directly press clay into the mold. Take it out after it dries. After use, please wash with water, then dry, store it flat, and store in a cool place. You should clean it immediately after used.
T**A
Not easy to slot together
Does not slot together... made 2 now with resin... the first one snapped. Made another one and filled the slot to prevent the resin narrowing it but still doesn't fit together... now sanding like crazy to see if this will at least make one phone stand. 🤨
A**T
Doesn't stand up......keeps sliding down. Would not recommend
Can make some excellent designs but not fit for intended purchase unless you purchase rubber to stop it slipping! Would not recommend
M**F
Wary to rebuy
Had to return as mould was for combs despite the label on the packets saying pudding bowls as per the description above.
J**E
Don't work
Initially I was excited about creating this stand but all it does is bend when u put it together no chance of putting a phone on it
A**Y
Doesn’t fit together.
I was really excited about doing the phone mould. Just to find they don’t slot together.. extremely disappointed with this now.. what a waste of money that was..
Trustpilot
3 days ago
2 days ago
