32.8ft 4000K White COB Led Strip Lights with Remote, Dimmable Bright Neutral White COB Light Strip, Indoor COB Led Lights for Kitchen, Room, Cabinet, 2 Rolls of 16.4ft

The media could not be loaded. I love this light strip because theres no gaps in between the lights. It's also cool toned and white. No warmth at all. It has a remote that reaches pretty far even with my small plant blocking the receiver. It comes with 3M already on the back of the light strip so all you have to do is remove the paper and stick. It has a very strong hold so once you put it on its hard to take off. The power cable is long and white so you should have no problems with length. You can cut it to your desired length. There are various modes and brightness levels. You can also put it on a timer and adjust the brightness yourself or use the preset buttons. It is the perfect mood light. It's also great quality and doesn't add any unnecessary heat. I highly recommend this light strip

The media could not be loaded. I had one set (of three) that had issues with powering on and off. The company worked with me through troubleshooting and at the end, there was no solution. They sent a replacement and they were actually great to work with. Now all three of my cabinets are well lit, look great and function as needed. Thank you very much, Tatazone.These lights leveled up my shop's cabinets for a very nice and professional looking store :)

If I could give this product 10 stars I would!This lighting strip is amazing! I installed it to run vertical....from the floor to the ceiling along a 12' corner in an open room. The effect is spectacular! The color temperature of the lighting is perfect....bright white and not yellow.This light strip creates more visual impact and interest than other light fixutres I have purchased for much much more in cost. "Big bang for the buck"!The installation is incredibly easy; if you don't need the entire length of the strip you can cut it into a shorter length.For the money this is a fabulous purchase and I likely will be getting another one(s).

I used this led strip because I don't have any ceiling lights in my bedroom. I stuck it on the edges of my wall on the top and it LIGHTS UP the whole room you wouldn't even believe that it's not a ceiling light! I also love that it has different dim settings. The only issue I'm having is when I do the 10% dim the light sometimes flickers for a while before it's stable again.

I keep ordering more of these. So easy to install. Watch the videos and you’ll see how easy they are to install

Love the brightness, ease of set up, and neat appearance

I recently purchased this LED light strip, and I couldn't be happier with my purchase! The brightness of this light strip is absolutely fantastic; it illuminates my room with a vibrant glow that instantly transforms the ambiance.One of the standout features of this LED light strip is the variety of settings it offers. Whether I'm looking for a calming, soft glow or a dynamic, colorful display, this light strip has it all. The ability to customize the lighting to suit my mood or the occasion is a game-changer.But what I love most about this LED light strip is how beautifully it lights up my collection of Godzilla and other figures. The colors are so vivid and the brightness is just right, highlighting the intricate details of each figure in a way that truly brings them to life.Overall, I highly recommend this LED light strip to anyone looking to add some excitement and ambiance to their space. With its incredible brightness, versatile settings, and ability to enhance the display of collectibles, it's truly a must-have accessory.

Initially, Amazon sent me the wrong product - just the COB strip, with no power supply or controller - however Tatazone made it right and sent me the correct item right away. I am editing my review to reflect what I have discovered now that I have attempted to USE these lights. I was attempting to mount them to a molding strip between the wall and the ceiling, to illuminate a rather dark corridor in my house... and it... *sort of* worked.Initially, I was extraordinarily impressed with just how insanely BRIGHT these strips are. One 16 foot roll is enough to illuminate a small room VERY nicely. But these strips could be as bright as the sun (they nearly are!) but it wouldn't do any good if they don't MOUNT well... and these do NOT. The sticky tack on the back of these strips is TERRIBLE, and to get them to stay where I tried to mount them - after I had thoroughly cleaned that surface with acetone and alcohol, then removed all cleaning residue with a microfiber rag! - I had to resort to adding some Duck brand double sided duct tape! Cutting all those tiny pieces of tape to make a product work correctly made the job 10 times longer and harder to do, and I was pretty frustrated and about to bin the whole project and try a different brand by the end.Here is the interesting thing, though... It didn't HAVE to be this way.As I said in the beginning, Amazon sent me a set of just the lights with no controller or power cable, and Tatazone sent me the correct set direct. That meant I had a second reel of the lights to play with and there was a very extreme and OBVIOUS difference in quality between the two reels.In the "Pro" set, the set that included everything, the LED strips had very lackluster mounting tape that was the next thing to worthless. The lights, themselves, were quite visible and obvious behind the yellow diffuser strip that makes a COB strip a COB strip. I could see each pinprick of light that indicated an individual LED (oddly, what I see does not show up in the photo, so your mileage may vary). The electric cable that plugged into the power cable was 22 gauge AT BEST, and barely longer than my hand. Very thin. very weak, and I have concerns about that thin wire carrying the 24 volt, 48 watt power of these lights.The reel in the "Plus" packaging, however, that was just the lights and no other accessories, were completely different. They were even brighter than the "pro" set, when plugged into the same power supply. You could NOT see the individual pinpricks of light and the diffuser strip was doing its job beautifully. The strip itself felt more robust, as if made with better materials. The adhesive on the back was SIGNIFICANTLY better. And the power cable end of the strip was a 20 gauge wire with firm solder and a heat shrink safety tube, with a cable that was about 3 feet long, offering a LOT more flexibility in setting them up. I REALLY wish that I had examined the "wrong" package more closely before I used the "right" one to do my project, because I would have used the "wrong" lights to make it turn out right from the get go. As it stands, I'm probably going to have to rip down what I put up from the "pro" box and replace it with the "plus" product, because the quality is just THAT MUCH BETTER that I would rather do the job again to make it right.The worst part is, I can't even find the "Plus" lights to buy, so that I can do other projects the way they should be... I can ONLY find the "pro", and I'm not willing to take a chance on that quality being the same again. Honestly, if I need to use COB lighting again, I'll try Pautix brand instead, because I had been debating between the two brands when I decided on the Tatazone... If I could guarantee that I would get the "plus" strips on y next purchase? I'd stick with Tatazone. But the "pro" strips are just... not worth it. Not if I have to reinforce and replace or double up on the mounting tape with my own stuff to get the project done.For the price, they're okay. But all in all, after the hassle of the wrong things being sent, and then the "right" things being less than satisfactory... I wish I'd gone with the Pautix originally.