12 Gauge Silicone Wire Spool 50FT Red, Extremely Flexible 12 AWG Automotive Wire, 680 * 0.08mm Tinned Stranded Copper (3.42mm2) High Temp 392℉/200℃ Rating 36 Amp 600V

I was having the radios and siren installed in my vehicle, and wanted to have a line run from the control head to the trunk lid in case I decided to add additional lights there. This cable proved to be flexible, and more manageable than standard 12 gauge automotive cable. I have utilized this drop, and it works perfectly. The radio man was very impressed by this cable.

Wire is wire.

This is great quality wire. I was surprised to see it was supposed to be over 1000 strand count for this size wire and I did not count the strands but there are definitely more than any wire this size I have ever seen. It is very flexible which was great because I had to pull it under the floor and through obstacles including through 3 walls to install it. I had changed my RV refrigerator over to a 12 volt compressor and due to a 30 foot run the wire I had with so few strands and smaller gauge had too much voltage loss to run the fridge well. This wire made an immediate difference and does not lose the voltage and carry amps load far greater than what I will ever need but it is nice to have more than less capability. I am very pleased with my purchase and would strongly recommend this product and the seller. It arrived a day early in excellent condition and was the quality described.

Bought this to fabricate a Coil On Plug (COP) ignition system for a vintage V4 motorcycle. I needed16ga wire to drive the coils, but was interested in the flexibility advertised because the fabricated harness will have to snake through the bike frame.I was amazed at just how floppidy this wire is. Floppy is just the word. My finished harness had red and black runs through 1/4" braid, and it was like snaking string through the tiny winding openings to go from the spark drive unit to the COP above the cylinders.This is great stuff. The 16ga is easily as flexible as the best 22ga wire I've used.Highly recommended. I just installed the finished harness last night, and don't have experience to rate durability or heat resistance (connections are crimped). Consider no update here to mean those characteristics are satisfactory- k -

To be able to easily braid 16 gauge wires is surprising, running power, speaker, and subwoofer outputs for a 570 watt amp with zero problems.

SHONSIN 6 AWG: More flexible than a 98 lb Olympic gymnast, the super fine/high count pure copper strands make this cable extremely easy to bend without kinks. You can literally tie it in to a knot without damage to the cable. Only con, and not really a con vs. an observation is they pack so many strands into the cable that once you strip back the silicone insulation and the copper unpacks slightly it's difficult to fit the bare copper into a 6AWG terminal end without being extremely careful and patient. Some terminal ends flare their openings a bit and this makes it much easier, but the straight/non-flared ends will present a challenge for sure.

I used the wire for my high volt components, I am not having any issues.

Nice product and very flexible