PVC RV Rubber Roof Kit 45 mil | 9'6'' Wide x 10'-40' Long RV (Camper) Roof Repair (35'), White (RVK45PVCW95)

If your not sure what's the best product to use well I'll help you out as I did a ton of research and I'm glad I used this kit and product.I found other kits for more and for less and ones with different material and ones without the butyl and lapping sealer but I'm glad I bought this.First off the material is very heavy duty not just a thin piece like factory tuff and other stuff I found.2nd the butyl I had and thought I didn't need,,wrong,,I'm glad I got the kit there was 2 huge rolls if butyl that was not a foam stick or cheap stuff it was a "much" better quality than the stuff I had already bought so I used it and you'll see for yourself it's hi end stuff.3rd is I had plenty if glue and was worried from a review I saw so I called the company and the guy assured me there's plenty and gave me tips and was a really nice guy to deal with. I did get 2 gallons and my roof is 30ft and 8'4 wide and I had about 3/4 gallon left, a half of a roll of butyl and 1 tube of lapping sealer left.4th was I was worried about it being folded to ship and from what I read you need to unroll right when you get it, I did that but my friend bailed on me for a week so I rolled it back up and stored it in my garage and was worried but no, it rolled out nice and I used to install flooring and vinyl in houses and I'm convinced it's because it's good stuff..it don't rip or crease at anytime because it's good stuff.I put it over new osb wood and the supplier said it's important to let it turn clear from white before you roll out and from what I read that expels the gasses and let's it bond both pieces and you do not have to put it on the material you simply roll the glue onto the wood and it's white and turns clear after about 10 minutes or so, wait and don't get impatient!It rolled over the edge nicely and the directions were great and I'd post pics but I forgot to get some and will try to get some later if I remember to (getting old,lol)..I am very particular about things and if your reading this you can thank me because this is your best choice 100%!

As several reviewers say, it comes folded in a box, not on a roll. Good thing or the shipping would cost more than the product. As soon as I got it, I bought a couple of 20 x 12 tarps and laid it out flat. Then I rolled it onto a 10ft section of 3inch PVC pipe to get the creases out. $20 spent on the pipe is better than several hundred more on shipping. I bought the 40ft version and it rolled really nice onto the pipe. It will stay rolled up until I get time to replace the roof in a few weeks.Followup - installed the roofing over the last week. The product is excellent, and is exactly as described. However, if your RV roof is large (mine is over 35') and curves both front to back and side to side (mine has about a 1.5 ft elevation change from back to middle to front), this PVC product isn't a good choice. It is not flexible like EPDM, and won't conform to the curves. I have some large wrinkles that I was upset about until I thought about it. Take a flat sheet of thick paper and try to make it conform to a large ball - it won't do that without wrinkles.I am ok with the wrinkles, this product is very thick and durable and should last for the remaining life of the RV, but if I had to do it over again I'd use EPDM that was on it instead of PVC. If you have a mostly flat roof, or only curves in one direction, this would work fine.

Reall thick and tough rubber roof !Don’t install in cooler weather because of its thickness does not bend over sides as well

I installed this kit on a 25’ toy hauler. It was difficult installing it by myself but it is possible. The hardest part would be getting the rubber roll on the roof. A tractor with a bucket can be helpful ;) The adhesive is very strong. Don’t expect to pull the rubber up after it contacts the adhesive.

The material seems to be of quality and the package came with the caulking, glue and butyl tape. The membrane came shipped folded and therefore left wrinkles in the material. we unfolded the product and rolled it up immediately from receiving it. We left the rolled membrane sitting in our living room for over a month. Just this last weekend we had the top of the Class C Jayco Greyhawk prepped with a completely new plywood roof. We followed the manufactures recommended instructions for installation and applied the adhesive and installed the membrane. To my surprise the glue cured relatively fast. We installed this material in the direct sunlight with around 78 degree weather. It took maybe 40 minutes to roll out the adhesive and unroll the membrane, and then we worked out the air bubbles. I also notice while installing the product that the membrane had abrasions on it which I believe were a direct result of the folding while it was shipped. At the end I seemed pretty dissatisfied with the product. The only issue with this product in the end was the wrinkles caused by the product being folded and shipped in a box. I would not recommend buying from this manufacturer in the future.

It’s a nice thick membrane and it will work just fine for the houseboat roof but it’s taken a few days to roll it out and get the wrinkles out. It was not rolled! It was folded poorly and stuffed in a tiny box. It’s not that warm in Iowa yet so we had to unfold it and heat it up with a heat gun and roll it out with a weighted roller to get the creases out. A complete PITA. If I lived in Arizona it would probably be fine but it’s been 50’ or so and cloudy this week.

The media could not be loaded. Exactly what we needed! Let the sun take care of the creases before use by opening it up and laying it out on a paved driveway in the sun a few hours. This will also make it easier to work with. It is quite thick and heavy, which is exactly what an RV roof needs, if you want it to last. We had an unexpected amount of fun replacing our RV's rotten roof. This kit helped the project go smoothly. Our roof is now waterproof. No more ugly redneck tarps when it rains!

quick shipping. seems heavy duty. Would have given a 5 star except I only got 24' 4" instead of the advertised 25'.