Motive Products 1735 Power Fill Pro Fluid Transfer Pump 1 GAL Tank with Schraeder Valve, Ball Valve Shutoff, and Hose, 4 Quart Capacity

Worked great w 2004 lx470. Made job super simple especially w 12 qt capacity transmission. Disconnected oil cooler return hose and did 1 for 1 oil swap until it bled new fluid. Worth the money to invest.Also used on my ct200h and es300h. Made it so easy to refill definitely reccommend.

Great product, good quality, used it to dispense transmission fluid and 75W 90 gear oil, worked like a charm, highly recommend recommend.

I have done many differential gear oil changes over the years. These are difficult because of access to the fill plugs, the shape of the gear oil bottles and the lousy design of typical oil pumps. This Motive pump works quite well, 75W90 oil flows as it should and it made 2 differential gear oil changes yesterday much easier for me. I wish I had bought this years ago. The pressure gauge doesn't work, but this isn't an issue - jump pump until you feel resistance and you'll be fine. This is a good-working product made with quality materials. This will last a long time.

I've got four gear boxes under my truck and dealing with those hand pumps has always been an exercise in (often failed) anger management. This did the trick - no muss, no fuss, no hassle. Just fill with oil, pressurize via the Schrader valve, insert the nozzle, then turn the handle. The four stars is due to quality control. The first time I pressurized the container it leaked air because they didn't use sealing tape on the gauge. After fixing that, the first few times I used it the gauge was sticky - had to be careful not to exceed 30 PSI.

Worked great! Used to fill my transfer case. Made the job so easy! Worth the money if you only have is access to drain plug it limited access to fill plug.

I previously used two different hand pumps to transfer oil: one that fit on top of a quart bottle, the other with two hoses on the ends. Both of these types are messy and a pain.This Motive is similar to their brake bleeder pumps but larger. It can pump 2gal which is more than enough for my purposes (usually 4-6 qts). I like the pressure meter and most of the time, you don't need much. The clear hose is high quality-as are the hardware. I liked the aluminum straw which I bent even more to fit the fill hole. This POWER FILLER was the bomb and worth the money. I believe it's made in USA too. The only downside is there are a few oz left in the reservoir and in the tubing that can't get pushed through. In other words if you fill it with 6qts, expect to be able to fill 5.9 qts.

This thing is awesome. Put the fluid in, pump it, and open the valve. No leaks, no hiccups. Definitely would purchase another one.

This transfer pump made the job of draining and filling my ZF S5-47 manual transmission so, so simple. I used a cordless tire inflator to pressure the tank to 30 PSI and left it connected to the Shrader valve so I could easily add more air when needed. Absolutely no mess. Clean up was a breeze with some denatured alcohol to clean out the tank and hose.