Dishwasher Rack Tine Prong Repair End Cover Caps White (100pcs) Anti Slip 1 inch Round Tips

I have an older Whirlpool dishwasher that either needed a new rack or these caps. The rack is around $150. I figured I have nothing to lose with these caps. They were a bit of pain to put them on so here is what worked for me: in a small dish, I placed a handful of caps and cover them with boiling water. After a few minutes, I would take them out with thongs. Most of them softened enough to be workable. For the few stragglers that wouldn't go past the top of the stick, I heated them with a hair dryer.

After accidentally scraping off some of the coating on the rack of our new dishwasher, this was an easy fix. It is very tight but eventually got it in place.

These dishwasher tine repair end cover caps are amazing! I almost spent more than $100 to replace just the bottom dishwasher rack and then saw these and thought I would give them a try. I know some reviewers said they had a terrible time getting them on. My husband put them on for me and although you had to be firm, they went on easier than we expected. They are on tight and feel like they are on for good. The color matches perfectly and I will no longer have rust marks on my dishes. I did get two bags and we wound up going into the second bag to cover some tines on the top rack. These are a great way to solve the rusted tines problem without breaking the bank.

These are very hard to put on. I did find it easier after reading other reviews to use latex gloves and use a little bit of soap to make it slide on easier.

These tine tips work great . some people say they are to small but i found that if you get them started on to the tine then heat with a hair dryer they will slide right on. they do fit very tightly and wont pull off.

These would probably install fairly easily on a brand-new dishwasher rack. Unfortunately, my dishwasher rack is a couple years old, and the plastic on the tips of the rack are worn off and the metal underneath is rusting. New racks are ridiculously pricy. These were a cheap fix. It is a major pain to get these started and pushed down on the tines. It takes several sessions to install them all, because after 20 or so, my fingers start getting very sore. Also, when installed, there is an air bubble at the tip. Time will tell if that is going to be a weak spot. On the plus side, they do seem to seal tightly and fix the problem of exposed, rusty tines.

Perfect length and size for my dish washer racks. They were easy to install, stay on really well, and will protect dishwasher racks from rusting on tips. Highly recommend!

Our dishwasher is only 3 years old but the tines were getting ridiculously rusted. Honestly it made me mad every time I loaded and unloaded the thing. I was looking into purchasing new racks when I stumbled upon these tine prong covers. Who knew these existed! It's the perfect inexpensive fix for rusted tines. If I could go back I would put these on as soon as we bought the dishwasher. Some of the tines were so messed up (had expanded and started splitting) that I had to cut the rubber tips a bit to get them on. For the ones that weren't so bad off, the plastic pieces slid right over the tines with ease. It's been a month and so far so good! I like that the color matches the dishwasher gray and I LOVE not seeing those rusting nasty tines anymore.