ErgotronNeo-Flex LCD Stand - Stand for flat panel - black

Update: After 2 years of use the stand is still the most recommended by me, I have since downgraded to a 24inch Monitor which it is designed for, and as expected it supports and maneuvers it perfectly. No wobble or fear of it wobbling over. Message me if you need answers or any information you may need on the stand before you buy it and I will be happy to answer with what I can.Highlights:-Removes any present lack of sturdiness from original stand-Ability to manipulate mode i.e. portrait or landscape viewing of the monitor.-Pitch and Tilt-Height fully adjustable-The stand has a ring in the base that allows the monitor to rotate on its base (can be desirable if you frequently need to rotate the monitor to show someone something.-Attractive finish-Easy to mount monitors to, and comes with four "easy to use" large headed bolts to fix monitors to the stand.An excellent stand for my  Asus VK278Q LCD Monitor 27-inch Widescreen Webcam - Black .I scoured the forums for recommendations and this stand was mentioned to work quite perfectly with larger displays even though it is not rated or recommended to do so. My Asus monitor certainly weighs less that the limit of this stand and as it is VESA 100mm and 50mm complaint I decided to get it and see ow well it works out.A very sturdy stand, that does not wobble or swap if you knock the table it is on. I primarily ordered this stand to better align my viewing height with the monitors center as well as to replace the stand my original screen came with, it was terribly movable and the monitor would wobble with the slightest knock which has been removed completely thanks to this stand.It did fit perfectly as expected and the lifting function works perfectly, not to mention the tilt. Now the only thing worth mentioning in my case is it is not possible to position the display in portrait mode only in landscape and is perfectly fine in this mode. Any 27inch monitor will not work in portrait mode with this stand as it is not high enough but this is a decision of the buyer if using a non-complaint 27inch monitor as this stand is only supposed to be used up to 24inch monitors.This stand is of good quality materials, a metal base that has a rotating function, adjustable high mechanism and screen tilt options. easy to setup and install a monitor to and comes with descent instructions.Certainly I highly recommend it if you are in need of a good stand.Message me if you need answers or any information you may need on the stand before you buy it and I will be happy to answer with what I can.

Arrived in a Big box and very well protected, all the bits required to build (allen wrench/key and all pre-packaged connections and screws)... apart from a philips screwdriver which most people do own or can acquire (there are only 4 Philips head screws and they don't have to be amazingly tight or even installed... depending on your preference).The main stand is spring loaded with a smart pulley system allowing you to adjust the tension at the top to increase and decrease the friction and force required to move up and down (screen weight dependant),The main foot has wide stance with great balance, can be pivoted/rotated around as the front foot has two handy little guide wheels hidden under the base, this allows you to rotate both screens on the fixed stand :-).VESA connections are perfect, when attached the screen can be rotated depending on the aspect ratio you require and also they can be locked into fixed positions using the Philips screws, VESA connection has two options, allen screws to permanently fix the screen or some very handy thumb type screws allowing easy installation and adjustment by hand.The mounting/slider bar is tough and easy to manoeuvre the screens over as well. there are about 4 different options for viewing angles you can choose when assembling the unit meaning you can decide the angle of tilt on the screens.Overall very impressed with the quality, build and function of the stand, well worth the money over many other big name brands that do not manufacture to this quality.Also included are the cable ties for your screen cables, very thoughtful ;-)

There is a large number of reviews of this product already, so I don't know if I can add anything useful.My take was that having broken the built-in stand on an old monitor, I wanted a desktop stand to replace it. Ideally, it would allow vertical and tilting movement.This solidly-made device does this and more - it also includes screen rotation. It's very sturdily constructed and once attached by the 4 Vesa points on the back of the monitor, required no adjustments of screws or springs. The vertical motion is spring counter-balanced and as supplied is suited to monitors in the middle of the specified weight range (mine is 5Kg); you just push it up or down. This addresses the question of at least one one other reviewer who found it difficult to adjust: assemble it, set it up and as likely as not you won't need to adjust for monitor weight.I do find however, that it is best suited to workstation type use - for example in a warehouse or hotel reception (where I recently saw a number in use) - that is where the operator is normally standing. This accounts in part for the lack of downward tilt - one of the things I wanted, since of necessity the monitor is mounted on a shelf above a desk. The other reason I guess why downward tilt is lacking is to avoid instability in which the whole thing could topple forwards. This type of tilt is probably only available with adjustable wall-mounted brackets, something I could not use in this particular instance.So all-in-all pretty satisfactory, if the downward tilt had been better, it would have had five stars.

Très stable et pratique

Die Halterung kann problemlos direkt an die Wand mit 8er Dübeln und Schrauben (nicht im Lieferumfang dabei!) geschraubt werden und hält bombenfest.Von der Wand bis zur Vesahalteplatte sind es ca. 8,5cm.Ich habe lange nach einer Halterung gesucht, die man in der Höhe verstellen und neigen (links/rechts/vorne/hinten/drehen) kann und dennoch relativ nah an der Wand ist.Mein PC Monitor (28 Zoll) wiegt ca 6kg.Die Halterung ist sehr massiv und das Material fühlt sich sehr wertig an.Klare Kaufempfehlung. Für rund 70 Euro bekommt man wahrscheinlich aktuell nichts Besseres.

Der 27' Apple Monitor mit VESA wird sicher gehalten und ist gut auf die jeweiligen Bedingungen einstellbar.

Bin von einem 24,5 Zoll Full HD zu einem 27 Zoll 4K Monitor gewechselt. Der Stand der da dabei war hat dafür gesorgt das der Abstand zu meinem Gesicht viel zu gering ist (Spinnenform), deshalb habe ich jetzt ungefähr 5 verschiedene Monitor Standfüße getestet (Wandhalterung kam aufgrund der Einschränkung der Beweglichkeit nicht in Frage da geringer Abstand zur Wand) und von allen war dieser hier endlich zufriedenstellend. Der Abstand zwischen Stand und Vesa Halterung ist sehr gering, so das der Monitor näher am Stand ist, dass sorgt dafür das der Abstand zum Gesicht größer wird. Nebenbei sieht das Ding auch noch richtig gut und futuristisch aus und lässt sich in jede beliebige Richtung kinderleicht ohne Hebel oder drehen von Schrauben bewegen.

Súper ergonómico, amo que me ayude a cuidar mi postura es de las mejores inversiones que he hecho