Corsair CC-9011095-WW Carbide Series 400C Windowed ATX Performance Gaming Personal Computer Case - White

A beautiful case that I would recommend to anyone, whether you have or haven't built a PC before. It was, in fact, my first time building a gaming rig and it is very intuitive with an SSD rack (though I couldn't use this unfortunately due to my fan control unit) and has a very fancy rubber flap into the back of the case which is brilliant for hiding all the untidy bits and allows for easy access to fans and the main components of the system with cables. It is quite heavy but com,es kitted with a shelter for your hard drives and a wired front IO (panel of buttons at the front) which works a treat (though when sleeping, the power button does like to flash brightly, all the time; but you can unplug the pin connector if you would like.)The build quality is solid and it has a lovely view into the PC which is great if you have some lovely corsair RGB fans because you want a private light show, and the acrylic is fairly clear but can get quite dirty. this is easy to clean as the hinges at the back are simply open fully then lift. getting inside the case from the covered side and removing the front panel are my only concerns as it is quits the job trying to put the side back on to the frame and squeezing all the wires back inside without damaging anything and then putting the thumb screws in without it popping off; highly recommend a two man job, one to push it in, the other to pout the screws in the aligned holes. this can be done by yourself with practise. The front requires small fingers to reach up into the corners of the machine to push in 6 clips holding the panel on on which can be a challenge and requires the side panel (as mentioned above) to be off.The shelter at the bottom is great to hide all hard drive stuff, but just remember the order and where you removed the thumb screws from as the shelter will slide in by the power supply first, then on the hard drives. The power supply, front panel and grill at the top all have dedicated filters for the 5 fan spaces one of which is a 140mm (the case comes with a standard 120mm and 140mm). The filters are very effective at stopping the dust and are easy to remove and replace. I recommend taking air from the front and outputting from the top though and therefore stash away the top filter to get the best temperature results. The top filter can be kept on for this but it will just get dirty and prohibit some airflow at the top outtake (it can also be damaged quite easily as it is a relatively soft plastic so unfortunately mine dented quite quickly).Overall, a very solid and modest mid-tower case. not massively flashy and big enough to hold some of the bigger cards like the mighty Gigabyte GTX 1070 G1 graphics card; which is obviously a very good thing for expand ability with just enough room to take 3 separate cards. Very highly rated from me. I hope you found this review helpful!

I wanted to build a new system to see the components inside. I wanted liquid cooling and because of the position where I keep my case I needed the window on the right. I wanted to fit some SSDs and a couple of hard drives, a DVD or Blu-ray player (old school, sorry!). I wanted to fit a MSI 980ti graphics card which is a long card and a liquid cooler. I also wanted a fairly large case. The 600c fitted the bill.The case has the usual connections on top and has a three speed fan controller too. The two 5.25 drive bays at the top are accessed through a quirky pivot door. It also had the usual front panel to motherboard connectors and connectors for the three fans installed on the case that allows their speed to be changed. It also has magnetically attached dust filters which are very effective. The left side of the case has plenty of room behind it to hide cables and there are plenty of grommets and access holes to allow neat cabling. It also has three SSD holders here which the drives just push in and lock with a retaining clip. It is very effective. The case allows a clean build and encouraged me to add red and black GPU power cables and the 24 pin motherboard power cable. It looks quite well.As the motherboard is upside down it meant the power cables for the motherboard are very tight, the PSU is at the top of the case and the graphics card logo is upside down. However, the case is quiet and keeps the components cool. I fitted a Corsair 100i with the 240mm radiator fitted in the bottom of the case although I could have fitted it at the front as well. With the liquid cooling the CPU does not exceed 50C even during long gaming sessions. The motherboard does not exceed 25C.This is a quality case which is big enough to allow an easy build. It looks good and is quiet. If you want a window on the right, this is the right choice.

Excelente custo benefício, qualidade acima da média e relativamente fácil de montar e desmontar

Great case, very spacious for it's size with lots of modular parts to fit your build. Materials are solid and feel good, and provide a nice quiet system. Back has good cable management, and the included shroud for the PSU and hard drives makes for a pleasant view when looking inside. The airflow is also great. I managed to cram a full ATX board in there with some bulky parts and it works great.

Como dice el título el gabinete es bastante bueno, me gusto bastante trabajar con el, es estético y permite una forma sencilla de acceder y apreciar su contenido, además de que no es caro.Lo bueno+ Barato pero de buena calidad+ Fácil acceso a componentes+ Ventana transparente a pesar del bajo precio+ Puertos USB 3.0 frontales y de comodo acceso+ Compatible con radiadoresLo mas o menos= Solo trae dos ventiladores de fabrica= No es cristal templado, pero por el precio ya se veía venir= hay que tener cuidado a la hora de remover el panel frontal o este puede romperse de los seguros que lo fijanLo malo- La tarjeta madre cabe exacta por lo que tienes que hacer todo tu movimiento con la fuente de poder antes de instalarla si quieres evitar dolores de cabeza- hacer movimientos con la fuente de poder con la tarjeta madre instalada es bastante difícil, en mi caso opte por no dejar las partes con los logos de corsair que esconden el psu, prefiero comodidad a estética- solo tiene bahía para 2 discos duros de 3.5 y 3 de 2.5, lo que te obliga a montarlos en otra parte o por fuera, es malo para mi por que los de 3.5 son mas baratos que los de 2.5 y no voy a pagar casi el doble por un hhd de 4tb de 2.5 solo para que se vea mas estéticoEn resumenEs un muy buen gabinete para quienes comienzan a entrar a este mundo, cabe todo y es estético, pero si tienes un plan a futuro asegurate que este cumple tus necesidades, puede que convenga juntar un poco las para cumplir tus expectativas, aun así este es un comienzo muy solido si tienes el presupuesto apretado.

Great case! Easy to install all the components compared to my old LianLi full tower case. Fans are good quality and overall build impressed me at this price point. 3 SSD and 2 HDD trays allow for good expansion. Air flow is very good with the 3 supplied fans and spacious interior. Top IO looks great and functions well. The 3 speed fan controller works very well along with the 2 USB3 and 2 USB2 ports on top. Corsair has done a good job with this case.

Ce boitier est superbe, il n'a pas de nuisances sonores en bureautique, et ne s'entend presque pas en jeu (derrière mon écran pourtant, et avec la MSI Ventus et le rad d'AMD en son intérieur).Sa disposition des ventilateurs, malgré une taille restreinte, est très intéressante, et permet d'avoir un flux d'air au top !La vitre permet un accès rapide aux composants, pour nettoyer rapidement si de la poussière aurait réussi à s'infiltrer (difficile avec les trois filtres qu'il possède [d'ailleurs, ils se nettoient avec un simple rincement]), ou pour ajouter rapidement de la ram, un M.2, ou une carte en PCI-E).Un gros défaut cependant, le livre n'est pas très détaillé sur comment fonctionne le boitier, dont surtout les rails à HDD, facilement abîmables si on ne s'y connait pas (il faut écarter pour enlever la boîte à outils et pour y placer un HDD).L'entretoise du milieu, qui n'est pas forcément vissable (celle de base ne l'est pas, mais une de rechange [l'étant] est fournie), est un point fort, ça évite de se retrouver comme un con, avec le shield M.2 au-dessus, alors qu'on a placé le M.2 et la pâte thermique...J'ai cependant eu un soucis avec mon boitier, il est arrivé avec un ventilateur cassé. Le SAV d'Amazon, ne m'a alors proposé qu'un échange dans les deux semaines, ce qui est compliqué quand on a besoin de son PC... Ils m'ont aussi dit que le constructeur ne ferait rien à part me renvoyer vers eux. J'ai cependant pris l'initiative de joindre ce dernier, qui m'a de suite accepté un envoi sans échange du ventilateur en question. Donc hésitez pas, si y a un soucis avec le boitier (ce qui reste très rare), le SAV Corsair saura géré (contrairement à Amazon...).En conclusion, n'hésitez pas et foncez ! Ce boitier mérite toute votre attention !