ArmorSuit (2 Pack MilitaryShield Screen Protector designed for Google Pixel 7 [6.3 Inch] (2022) Case Friendly HD Clear Film - Made in USA

We have been using this screen protection product for a few years. The tempered glass protectors that are expensive and heavily pushed invariably pick up chips in your pocket when keys and phone accidently end up in the same pocket, and the chip turns into a crack and you need to replace it. I have had one of these on my Pixel 5 for a year now and it still looks great. Any small marks seem to just go away. Phone often ends up in pocket with keys and it hits the ground occationally so it does a fine job protecting the phone that way. In all the years we have had Pixel phones and used these screen protectors we have never had a broken or cracked cell phone screen. This product can be a bit tricky to put on, but if you follow the process they lay out in their video, you can get the hang of it. MIne only ended up with a couple micro bubbles you can only barely see when the screen is off and the latest one I did for the Pixel6a came out perfect with no bubbles. You do need to wait the 24 to 36 hours before putting a case on, as if you to it too early and have not really pressed down the edges and let it throughly dry, you can cause an edge of the screen to get lifted up and it doesn;t really go down again after that, and you can see it. That has happened before to me, so I have been very careful lately to really give it time to dry. I can't address the impact to the finger print sensor as my wife is not using that feature. I also can't address anti-glare feature as I don't know how to tell what impact it has on the phone's screen. The screen is still shiny and bright and you can see reflections, but the film itself is basically clear, maybe a little opaque, so I could see that it might reduce the phone's glare somewhat, but I was not aware that this was a feature so have not compared the screen glare before and after screen protector installation. Bottom line, if you are having problems keeping the tempered glass protectors from chipping and cracking, this is an excellent alternative and a lot less money.

The protector itself is very good and protected my screen from scratches from the little time that I used it. But why did I only use it for a little bit of time?Dust.When installing the screen protector, do so in your cleanest room and don't wear any long sleeves or anything that attracts dust. Both times I installed the protector, I ended up having just one or two specks of dust that were right in the center of my phone. It bothered me, but I thought I could just be fine with it given how protective the film is. I was wrong. The dust specks just annoyed me too much and I removed the protector. I would see it while watching videos, reading articles, looking at pictures, taunting me, and I just couldn't handle it anymore.Dust can be hard to spot until the protector is applied and drying, but you can spot it early enough in the process to remove the protector and attempt to clean it off to restart the installation process. Be generous with the cleaning solution as this helps to install evenly. I caught a dust speck in my second installation and used the included squeegee to wipe it off. But thanks to my clumsy and tired self, I dropped the protector on the ground sticky-side down while I was cleaning the singular dust speck. The protector was a total loss.So now, I'm 0-2 on flawless installations. Learn from my mistakes and you'll have an excellent screen protector.

I really liked that this film didn't impact my fingerprint reader at all. It still works well on the Pixel 7 Pro. It doesn't feel too rubbery, and is as close to a tempered glass protector as TPU films go. The surface is smooth to glide my finger across, and there is no orange peel effect. My screen is still decently crisp with slightly less glare. It does look ever so slightly frostier with it on than without it, but the font is clear and the colors are good. I can still feel the haptic feedback just fine when I type.For me, installation was a snap. I tried to do it as soon as possible after getting the phone, to avoid dust accumulation. I washed my hands, wet my finger tips and the shield film, and slapped it on the phone. I slid it around until the position was just right and then squeegeed it. The film instantly became smooth, and I didn't have any dust trapped under it. I'd definitely do this on a clean table without pets roaming around, and wear something that is sleeveless.**Just an update: I noticed the screen does tend to attract a bit more lint/dust than a glass screen protector and tends to smudge a little easier. Overall, not a deal breaker for me yet.

Well it was fairly simple to install. The edges require a little extra finesse, so you kinda just have to keep working them until it all smooths out. The edges will keep trying to raise up, so you just have to keep rubbing them down with the squeegee until the adhesive is tacky enough to take hold. I didn't have any bubbles or dust once it was completed. If any part of the screen protector is dry when you apply it, that part wont adhere to the phone properly, especially the edges. The liquid won't hurt your phone, the phone is water resistant anyway.The screen protector is very clear and does not impede visual clarity. It does not impede the fingerprint reader at all (if you apply it correctly). I didn't even have to re-register my fingerprints.This is not a tempered glass screen protector, it will not protect it from drops. This screen protector is great for protecting against scratches. Most screen protectors will not protect against drops, but tempered glass does offer limited protection. If you want tempered glass, go with the whitestone dome. Otherwise, this is your best bet for a non-glass screen protector.

You wouldn't even know there is a shield on my phone - it doesn't let water underneath when I'm taking pictures in the rain or snow (like my previous phone protective cover). I also feel the vibration through the shield which I didn't with my other phone protector. LOVE THIS. My partner put it on my phone so I just suggest you read the directions carefully before diving in so you do it right.

Pros: Packaging and presentations are very nice.Cons: I'm very handy and an experienced technician and I could tell you that this product is one of the wors that I have ever bought on Amazon. The protector is made of a cheap material (very hard to install) and the price you pay is for all the accessories on the box. I know that is very hard to find a screen protector for a Galaxy Note Edge but I don't recommend to buy this product.

Only screen protector that actually works for the Note Edge. Other screen protectors the sides come flying off on the edge of the phone. A bit pricier but believe me.. ONLY one that works.

fits the note edge perfectly excellent product, decent quality, reasonable delivery, great seller

Awesome quality and easy to follow instructions.