OregonQ515066 Polycarbonate Face Screen, Yellow

The visor is neither fish nor fowl. Too short to fasten on the outside then drilled holes are in the wrong place for fastening on the inside.Oregon responded to my complaint with a picture of how to fit it. It works perfectly now. Many other buyers had a similar complaint so a fitting diagram is obviously needed!It fits on the outside and flips up. Easiest way to build it is to connect to the inner most holes with the visor in the up positon.

Seems to be a lot of confusion over this in the reviews. This can take 2 different kind of screens, a fixed one like in the picture and a flip up one like i received. The flip up screen fits around the outside with the head piece the correct way up, there is a ridge around the head piece that stops the screen going too low. On the screen there is a blue layer and a clear layer that needs peeling off, the "like looking through frosted glass" means you haven't peeled the clear layer off. It looses a star because the screws are a bit rubbish and need holding on the inside to tighten up........ but then it was pretty cheep

Not suitable for using with lathes or chainsaws. Screen is flimsy plastic

Cheap and great quality.. protect your face and eyes with this, don't risk it, your face and eyesight are worth a lot more than the cost of this kit...

Obviously thrown together from whatever the manufacturer could get their hands on rather than a designed complete item. Locator holes in visor do not line up with those in the headband, so you have to drill it to fit. The bolts that must be removed to fit the visor are behind the foam band on the inside of the headband, so you have to peel it back. The bolt is too long for the twist on nut or the nut has been made badly as the bolt cannot pass through to allow it to tighten - get your drill out again. Finally the twist on nut is too wide and catches on a ridge on the headband. Photos show after drilling.The worrying thing is, if the manufacturer can be this incompetent, do you trust the protection it is supposed to offer. Unfortunately bought over 30 days ago, so can't go back without speaking to 6 different people before they accept it is a warranty claim not a 30 day no questions asked return - so as can be seen drilled it and fingers crossed.EDIT - having had another look at this, it appears that without changing the photo on the box or on sales listings, Oregon have changed how it is put together. Headband is obviously designed for original version, but looks like they saw an opportunity to reduce the number of visors they had to make by 'robbing' one designed for a different model and making this hybrid model, no wonder people are confused. So you are left with either drill it and fit the visor in to the designed slot inside the headband or fit on outside of the headband in the cobbled together option. Makes you wonder which one passed the British Standard test.

great buy, ggod price just the job, good protection when strimming

It does the job ; very light which is not as good as it sounds -- it moves easily and does not sit snugly and firmly on the head

This product was very hard to assemble took a long time but finaly worked it out Now satisfied with end result

Bueno 👍

Il est vrai que les trous ne correspondent pas aux vis, mais perso je visse le plexiglass à l'extérieur du montant ce qui permet de régler l'angle du plexi par rapport au support ce qui est toutefois bien pratique. Depuis plus de 15 ans j'utilise ce produit. Pour le nettoyage: tremper la visière dans de l'eau pour hydrater les éclats d'herbe et ou de végétaux puis avec une éponge douce frotter délicatement pour éviter de railler le plexi

Non si trovano i buchi per visiera, montaggio non corretto

... wenn der Hersteller die Verbindung zwischen Scheibe und dem halbmondförmigen gelben Träger so vorsehen würde, wie es das Design des Trägers eigentlich vorgibt Nämlich genauso wie es die Fotos auch zeigen: die Scheibe wird sicher in der dafür vorgesehenen Klemmrille auf der Innenseite des Trägers eingeklemmt. Stattdessen liegt der Verpackung eine Montageanleitung bei, nach der die Scheibe mit nur zwei billigen Plastikschrauben rechts und linke von aussen (!) vor dem Halter montiert wird. Zum einen sieht das sch.. aus, zum Zweiten kippt die Scheibe runter und zum dritten ist der Halter gar nicht dafür ausgelegt.Ich habe das Teil trotzdem behalten, da es mit einfachsten Mitteln (drei neue Löcher in die Scheibe bohren) so modifiziert werden kann, wie es eigentlich soll. Dann ist auch alles stabil und nutzbar. Aber so?? Für soviel Blödsinn gibt es anstatt 4 Sterne nur einen.

Le plastique se fixe soit a l'exterieure et c'est tres simple mais s'ajuste mal aux bordsSoit se fixe a l'interieur, mais il faut faire deux trous en plus dans le transparent (mais vu les clips, c'est probablement comme ca que la piece jaune a été pensée en conception)Pour les graincheux; il faut enlever les 2 films de protection ... sinon effectivement c'est moins transparent ;)