Paint Sprayer, 700W HVLP Spray Gun with Cleaning & Blowing Joints, 4 Nozzles and 3 Patterns, Easy to Clean, for Furniture, Cabinets, Fence, Walls, Door, Garden Chairs etc. VF803

I recently tackled a big painting project, and decided to finally invest in a paint sprayer. After a bit of research, I chose this model, and I am absolutely thrilled with my decision! This paint sprayer truly works wonderfully and has completely transformed the way I approach painting.The biggest revelation for me was how easy it is to use. Even as a first-time sprayer user, I felt confident and in control from the moment I started. The instructions were clear, assembly was quick, and the controls were intuitive. I was able to get a smooth, even coat of paint on walls, furniture, and even some intricate trim pieces with minimal effort. The consistent flow meant no drips or streaks, which is a huge win in my book. It significantly cut down on painting time compared to traditional rollers and brushes, and the finish is incredibly professional-looking.And then there's the clean-up – it was an absolute breeze! This was a major concern for me, as I'd heard horror stories about paint sprayer clean-up. However, with this model, the process was surprisingly quick and straightforward. The design allows for easy disassembly, and the parts are simple to rinse thoroughly. I spent more time taping off areas than I did cleaning the sprayer, which tells you something!If you're on the fence about getting a paint sprayer, or if you've had bad experiences with others in the past, I highly recommend giving this one a try. It's user-friendly, delivers fantastic results, and makes clean-up so painless that you'll actually look forward to your next painting project. A truly fantastic product!

Incredible product ! Never used a spray painter before, although I have painted a lot. It was very easy to use. Follow the instructions about thinning out the paint and spraying technique and you can’t go wrong. I had a very large outdoor garden planter to paint. I could not believe how quick and easy it was. It looks professionally done. It took longer to clean up the painter parts than to actually paint. That was easy also. Obviously looking for more spraying projects. This product is well made, simple to use and clean up. Great value !

I'll speak for most of us when I saw you're buying this because you think a sprayer will make your life easier and maybe even give you better results to boot. You're not a pro looking for top quality and scrounging Amazon for a cheap sprayer, let's be honest.That said, that was the boat I was in. Having a couple bad shoulders and needing to refinish rooms, I thought a sprayer would make my life easier. To be specific I bought this to paint rooms - ceiling, trim, walls. I did a ton of research on it and had this unit in my cart for a long time before finally pulling the trigger around a Prime day.This was my first foray into spraying - I'd consider myself an advanced DIY-er and always rolled/brushed rooms. After using this on a 17x10' room here are my observations, which are more about spraying in general and not so much this specific unit I guess.The unit comes apart very easily to clean. This seems to be a feature of most spray units which have a "wet end" and a blower. The blower forces air past a venturi tube which sucks up paint, generates a fine mist and blows it onto a substrate. Any part of this that could realistically touch paint comes off as one unit, disassembles easily and cleans in a breeze. The nozzles are removable, which go in rather tight. Wager sprayers seem to unitize the wet end, so rather than have different nozzles, you replace the entire assembly, but you're accomplishing the same thing.I think there are a few key aspects to getting good results:<Viscosity>You'll likely need to thin your paint. USE THE INCLUDED VISCOSITY CUP. Unless you're a pro (and you're not), you'll need to use the viscosity cup to get the viscosity of the paint right. Too thick and it will spray in clumps. Too thin and it will run like mad. As a point of reference, I use Behr paint and the wall paint I was using suggested no more than ~ 6% dilution. I was more like 25% or so. The manual lists some recommended values for viscosity, 20-40 for water based paints, I targeted mid 30's based on some info in a YT video. It seems all these style of paint sprayers use the same DIN spec for viscosity.So you're thinking I'll just make one larger batch (in a bucket) so I dilute only once? That wound up just making a big mess for me, so I mixed in the included container and shook by hand. I also didn't have luck trying to keep track of the dilution to make it more repeatable, that's because the container gets coated with paint making it impossible to see the paint level.<Nozzles>The unit comes with 4 nozzles; the manual mentions a 1.8 but you only get a 1.5 and a 2.0, so I'm not sure what that is referencing. I used the 1.5.<Technique>This is the most difficult part. You can put some paper up on your wall and play with the settings, but for the most part provided your viscosity is right, your volume is set correctly (the knob that controls how far you can depress the trigger), and you don't dwell in one spot too long, the results should be OK. No shock, it's a lot like using a can of spray paint in that regard.<Masking>You have to mask absolutely everything. Even if you take care of overspray, the fine mist this generates will dry as it falls leaving a fine dust EVERYWHERE.<Limitations>I sprayed the ceiling, trim and walls. The Trim paint specifically said "do not thin", which of course I did, and I had to a LOT. I wouldn't recommend that - it was so thin that it ran too much and after one coat I saw I'd need more so I just used a brush.All in all, I would probably use this to paint a ceiling again, since I'm pretty much masking off the entire room anyway (these ceilings currently have popcorn which is being removed and that's a messy process). I'm not sure if I would spray walls again, since even after masking and using a spray shield I'll likely have to cut in the ceiling again, and I don't think I want to mask the entire ceiling to spray the walls.So TLDR, decent unit, absolutely great for the value. No issues at all, but just keep in mind the limitations of spraying.

I was shocked at how well built this unit is and how easy to use and clean. I've had wagner painters in the past and dreaded the cleaning process. This breaks down so the motor is separated from all of the other components. Highly recommend getting the paint bags and always filter you paint. I wish they offered additional paint cups or full head units. Still a bargain for if you buy a second for running primer first and then paint. I wipe the tip with a wet cloth and leave the wet cloth on the head, it sprays flawlessly the next morning.

Got this yesterday. I read some good reviews and some bad ones. I took a chance and ordered it. I'm glad I did.I ordered it because I had to paint the underside of my back deck awning. I read all the directions before proceeding. I put it all together, which was very simple to do. Diluted my paint and went to town with painting. This machine is awesome. Works very well. It's the first time I had used a sprayer like this. Well-made, heavy-duty sprayer. The parts that need cleaning come apart very easily and can be cleaned with no issues. Play around with it a little bit with water in the canister before painting. Try different nozzle settings and see what spray pattern works for you. I was not in a hurry to paint, so I tried the different nozzles on my wooden fence to see what will work for me. This little powerful machine is a game changer. I was able to paint a lot, until the wind picked up. LOL. Make sure you tape off what you don't want painted. The wind got really bad, so even the areas that were taped off got overspray. I will be using this machine for many many projects in the near future. Spraying my wood fence will be the next thing. Happy painting.