Duronic Projector Mount Stand for Ceiling or Wall Bracket PB05XB | 13.6kg Capacity | Universal Heavy Duty Adjustable Clamp | Tilt Swivel Rotate | White

I used for mounting an optoma uhd300x to the ceiling.this item was far better than I anticipated,especially at this bargain price.I expected to have the fiddly task of assembling a box of parts, how wrong could I be, there are 2 main ready assembled parts.the part you fit to the ceiling is preassembled, I screwed it into a joist.the part for fitting to the projector is complete, you just loosen and swing the 4 arms out, I removed one, only needed three. and then extended two with parts provided.I used the adjustable feet mounts for fitting the cradle rather than the 3 bracket mounting points, they are further apart and I thought it would be more stable.I set the cradle to the projector to give a good balance, then simply hooked the projector up to the ceiling mount.setting the pj to the screen was so easy.one tip I have is to fully undo the 2 tifghtening screws at the hook connection before offering the pj upto it, just makes it a bit easier.I fully recommend this product, compared to the bracket I've been using for 12 years, which cost 3 times as much, is more flimsy. less adjustable and never held its position for long, the duronics is brilliant.it even looks good, with a nice finish.like I say, I used the adjustable feet to mount the bracket to the pj, so you don't even need to get any extra screws/ bolts etcalso I don't normally take the time to review a product, so that says something about how impressed I am by this bracket.

This is a great deal at the price. I did consider spending 10x on the one the same brand as my projector but when I saw the Duronic name I knew this was something I could trust. I used my own fixings on the ceiling as the ones supplied were overkill to be honest. I had to use the supplied extensions as the arms weren't quite long enough to fit my Epson TW7100. The plastic spacers were a bit fiddly but when I looked closely at the pictorial instructions I worked that out. Not the prettiest however I don't often stare up at the ceiling.

Excellent projector mount, very sturdy, easy to set up and easy to adjust.

I bolted it to the ceiling and hung an eleven kilo projector off it. I thought with that weight of projector it'd take two of us but actually just one of us clicked it into place. Slightly fiddly to adjust, and I think the vibration of the projector and possibly passing traffic means I really should get up to the ceiling and re-adjust after a six month trial period. I'd buy it again.

This is a good, solid piece of kit that has all the bits you need (although I opted to use my own wood screws to secure it into joists as the provided screws seem more suitable for use with the supplied wall plugs). I chose it specifically because my (Epson) projector has a seemingly unconventional 3 mounting points and the flexibility of this mount was able to deal with that fine.Although relatively easy to set up, still expect to spend 30 minutes, but I expect that to be the same for all models. So far it's keeping its position ok. The only minor improvement would be a more solid way to secure the back/forward tilt, as it is done by tightening the hanging bolts rather than like the more secure methods for other dimensions, but this seems to be holding ok. Happy with this.

Very good and easy to set uo

Product is excellent, great projector mount for the price, very adjustable, works perfectly as I need it. Unfortunately it was prime promised for a certain date and was late, but that's a minor issue as it fills my needs perfectly so otherwise I'm very happy!

The unit is very strong and sturdy. However, assembly instructions are hopeless. It is not immediately apparent how the projector is to be attached to the legs. Also, the unit is supposed to fit to a wall as well as a ceiling. I can't see how the angles will allow a wall fitting. No response from manufacturers when advice requested.