Akasa 20 Rubber Case Fans Mounts | Silicone Rubber Pins | Anti-vibration Fan Mounts | 20 pcs | 73mm | Black | For Computer Cooling Fan and PC case fan | AK-MX003

Great quality and perfect for job . made sonds pc run alot quiet .. thank you

These Akasa rubber fan mounts made a noticeable difference in my PC build. Swapped out the standard screws for these silicone pins and instantly reduced vibration noise - fans are now so much quieter. Installation was quick, and the 73mm length worked perfectly with standard case fans. The soft rubber absorbs movement without compromising stability, and the 20-pack gives plenty of coverage for multi-fan setups. Fairly sure they would be compatible with any normal screw type fan. Highly recommended if you're chasing a quieter rig without spending a fortune - a small upgrade with a big payoff

I got a pack of these to install some fans in my PC case. Because of the design of the case, a Fractal Meshify 2 XL, I was getting a loud noise from the front case fans at a certain RPM. After installing these, I can now run the case fans at a higher RPM than before (1500 RPM, up from 1100 RPM), all while keeping the noise and vibration levels down. The silicone rubber pins are reusable, well-made and easy to install, I would definitely recommend getting a bag of these.

Very good anti-vibration mount, _assumed you've installed it correctly_. Most people who claimed no improvement didn't correctly install - either pulling fan against case (too tight) or not properly pulling through end pieces (too loose). Long tail makes it easy to install in very tight spaces without having to disassemble the system with some help of long-handle pliers. Then the tail could be cut - or left in place if no interference with anything for later potential re-use. The heads are relatively conspicuous and look a bit like fat screw heads. Which helps with tidy-looking install. I only wish the head had less "bulge" on it - I had to cut excess material when they've interfered with some dust filters.

Surprisingly easy to fit and a simple solution that seems to work pretty well.

Depending on where your fans are, I think these could be a real pain to install. My fans were screwed in already, so I replaced the screws one by one with these, which made life a lot easier. I can imagine if I was starting from scratch I'd probably need to take most of my components out to get these in. I would still consider screwing the fans in first so that they were in place. I have a pair of long nose pliers, which were essential in my view. A few times I thought I was going to snap the rubber pulling them into place, which was a concern because I have 5 fans and therefore no spare mounts. But they all survived. It was absolutely worth the effort, I'd almost given up trying to make my Noctua fans run with less whine. I thought I'd give these a punt because they were the cheapest I'd seen anywhere else. No regrets, was very much worth the time and money.

This is not a bad product, I'm sure. My review is a warning to others hoping to fit these mounts to smaller fans like 40mm or 50mm diameter. These fans can often be relatively noisy because of their small size. Some cases only have room for such small fans and cannot be adapted to fit larger ones. For example my 2U server case. Larger fans have small holes in the corners, small enough for a metal screw to secure into, on both sides of the fan. Between the two holes there is an open gap. That is what these mounts are designed for and will work well, I'm sure. But with smaller fans, there is no gap and a single narrow hole from one side of the fan to the other. These mounts will simply not pass through those holes, the holes are too long.

I was dubious at first as I'd seen other builds with these but never seemed to fit right and seemed loose. I thought as I'm installing so many fans in my new build that I'd give these a try and boy! I'm glad I did. It saved time and the vibrations stopped plus lowered noise and so so easy to install fans in tight spaces! Honestly give these a go you won't regret it! My only worry was running out and having to buy more 😀

La instalación es muy fácil y rápida, y he notado una gran diferencia en la vibración y el sonido de los ventiladores. Estos soportes absorben eficazmente las vibraciones, lo que resulta en un funcionamiento más silencioso. Además, su diseño es versátil y se adapta bien a diferentes tamaños de ventiladores. Me gusta que estén hechos de material duradero, lo que garantiza que aguanten bien con el tiempo. Sin duda, son una inversión recomendada para quienes buscan mejorar el silencio y la eficiencia de sus sistemas de refrigeración. ¡Gran compra!

Took me a while to find rubber mounting screws of this type. They are great , had no trouble replacing my metal screws wirh these. No breaks or snaps, a lot of reviews on rubber screws say they broke or snapped but to do that you would have to put beyond normal for on them. Highly recommend for computer enthusiasts looking to lower computer fan vibrations.

Ich habe diese Stifte gekauft, um meine sechs neuen "ENDORFY Fluctus 140 PWM"-Gehäuselüfter zu entkoppeln. Ich war vor der Bestellung etwas skeptisch, da mein "NZXT H7 Flow"-Gehäuse diese länglichen Schlitze für die Lüfterbefestigung hat. Die Sorge, dass die Lüfter mit den Stiften in den Schlitzen hin- und herrutschen könnten, haben sich glücklicherweise als unbegründet dargestellt. Im Gegenteil: Die Stifte sitzen bombenfest (selbst bei OC-Tests mit 100% PWM-Speed hauen die Lüfter nicht ab). Dabei geht die Installation sehr einfach und problemlos vonstatten: Den Lüfter vor die Gehäuselöcher, bzw. Schlitze, halten und die Stifte von hinten duch die Gehäusewand und die Löcher der Lüfter ziehen. Man merkt dann bei weiterem Ziehen wie es erst an der Gehäusewand und dann an der vorderen Lüfterseite "ploppt". Den überstehenden "Schniepel" kann man dann einfach mit einer Schere kürzen, wenn man möchte. Während der Installation ist kein einziger Stift (24 Stück in meinem Fall) gerissen. Die Stifte kleben nicht und weisen generell eine sehr gute Verarbeitung auf. Und das für diesen günstigen Preis. Wie wohl herauszulesen ist bin ich total begeistert und zufrieden mit den kleinen Kerlchen. Daher eine klare Empfehlung! :-)

Om de ventilatoren zo goed mogelijk te ontkoppelen kunnen deze rubberen montage stiften worden gebruikt om de PC stiller te maken. Bij de montage is het van belang om de handleiding even goed door te nemen. Wanneer je bij de montage te hard aan het rubber trekt kan deze breken, dus dat is wel even opletten.

day and night dfference after installing tese