Draper Clamping Mitre Block | 367 x 116 x 70mm Mitre Box | 45° , 22.5° and 90° Angle Precision Cutting Box | Moulded Coving Miter Tool | Spring Clamps | 09789

Does what it needs to do

Worked great for most of the job, unfortunately one of the clamps snapped, overall would buy again.

Eh! It does the trick but overall pretty disappointing performance. The two clips to hold wood in place basically failed after a couple of hours of use requiring me to hold them manually while sawing. It's light so unless you mount it on something else be ready for it to move around quite a bit. Got the job done in the end but wouldn't recommend to others.

Great little tool which is big enough for 122mm half-round guttering, so those connector joints look better and far less likely to leak!

Large enough for the piece I had to cut, however cheap plastic, offered little resistance to the saw blade so the guides are now quite worn, the clamp system is worthy of Temu. Did the job as a one off, easier than trying to guide 45 degree by eye, so will no doubt be useful but overall seemed cheap to be branded Expert, more like The Range. For Expert I would expect more resilience in the plastic used, less flex and better clamp system.

Having used a few mitre boxes before this is terrible. Bought it to save myself having to use my actual mitre saw for small stuff but its not worth the aggro, made for some terrible mitres in architrave.

Bought this to make frames, but found where the plastic bends I ended up filling corners. Tried very hard to make it work but no. Sorry it need to be stronger. The clamps were helpful but I think it would all break pretty quickly.

Like the weight and the ability to attach to bench and clamp various sizes of timber in place for sawing.

Muy bueno cumple su función perfectamente

Mir gefällt die Lade, weil es nicht nur 45 Grad gibt, sondern auch 22,5 Grad.

Acquistato per regolare delle cornici in polistirolo. Fa il suo dovere, noi per il materiale morbido e per praticità abbiamo usato come "seghetto" un coltello e la lama non scorreva proprio agevolmente nelle scanalature, ma immagino che usando l'attrezzo adeguato non ci sia questo inconveniente. Le scanalature offrono molte varianti e permettono di tagliare con gi angoli più adatti ciascun bordo/listello.

Cette boîte à onglet est d'un concept bien pensé avec les deux petites presses intégrées. Elle est large et stable mais malheureusement, les fentes pour guider la scie sont trop larges et il en découle un guidage très approximatif de la coupe. Je lui ai préférée son homologueDraper 10266, plus simple, moins chère mais mieux conçue et semblant plus solide...

Ho acquistato questaguida x tagliare dei profili in alluminio, fissata al tavolo, ha fatto il suo dovere, non è super resistente te ma non ha avuto problemi, basta usare la giusta dose di forza, unica pecca che non sono riuscita a tagliare i pezzi fino in fondo senza doverli girare, perche i tagli laterali si fermano prima del fondo